Using Your Tv Remote For Media Playback - Samsung Infuse SGH-I997 User Manual

To Power Source
Travel Charger
MHL Adapter
Note: Any incoming calls or messages will pause the media output. After
taking the calls or acknowledging the messages, the media will
resume playing.
Note: If your TV has multiple HDMI ports, you may use any of the ports but
need to make sure your TV settings have the correct HDMI port
selected. Consult your TV owner's manual.
The TV screen will instantly display what is on your device home
screen.
137
Universal
HDMI Cable
(not included)
To TV
To Phone
Power/Accessory
Interface port
Note: After connecting the MHL Adapter, the upper and lower sides of the
TV/Monitor's screen may be cut off. In this case, you can adjust the TV/
Monitor in the Settings menu on your TV. Consult your TV owner's
manual.

Using your TV Remote for Media Playback

Your device comes with RCP (Remote Control Protocol). With RCP,
you can:
Use the navigation keys on your TV remote to browse through your
•
phone User Interface.
Access Video conferencing, Gaming, Internet, etc.
•
Use the TV remote media keys to control phone video while the phone
•
is connected to your TV.
To connect to RCP, follow these steps:
Connect your phone to the HDMI Port 1 on your TV if
1.
possible. For more information, refer to "Media Playback
on HD TV" on page 136.
Set the following settings on your TV:
2.
Note: Menu setting headings may differ depending on the brand of your TV.
Go to Menu/Tools
MHL Device (Setup) and set Anynet+ (HDMI-CEC) to ON.
Settings/Input Anynet+ (HDMI-CEC)