Samsung Infuse SGH-I997 User Manual page 135

Tap the Security field and select a security option. This
3.
must match the current security setting on your target
WAP.
If secured, you will also need to enter your WAP's
4.
password.
Tap Save to store the new information and connect to your
5.
target WAP.
Note: The next time your device connects to a previously accessed or
secured wireless network, you are not prompted to enter the WAP key
again, unless you reset your device back to its factory default settings.
Turning Wi-Fi Off
From the Home screen, tap Settings
1.
network Wi-Fi settings.
Tap the Wi-Fi field to deactivate the feature. The green
2.
checkmark will be removed.
Note: Use of wireless data connections such as Wi-Fi and Bluetooth can
cause an added drain to your battery and reduce your use times.
Manually Scan for a Wi-Fi Network
From the Home screen, tap Settings
1.
2.
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status at a
glance:
Wi-Fi Advanced Settings
The Wi-Fi settings - Advanced menu allows you to set
Wireless and
up many of your device's Wi-Fi service, including:
Setting your Wi-Fi sleep policy
•
Viewing your device's MAC Address
•
Configuring use of either a DHCP or Static IP
•
To access the Bluetooth Settings menu:
1.
2.
Wireless and
network Wi-Fi settings.
Press Scanning....
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point (WAP).
Displays when Wi-Fi is active but there is a
communication issue with the target Wireless Access
Point (WAP).
From the Home screen, tap Settings
network Wi-Fi settings.
Press Advanced.
Wireless and
Connections 130