Jason.L San Fran 3 Person Run Workstation Installation Manual

INSTALLATION GUIDE

San Fran 3 Person

Run Workstation

Size: 1200mm

Tools Required: Power screwdriver.

Special Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s).

They will not match your particular table/desk base and woods screws will be required to be screwed

directly into the underside of the top.

www.jasonl.com.au

Need help!

Call us on

1300 527 665

Page 1 of 4

Table of Contents

Need help?

Do you have a question about the San Fran 3 Person Run Workstation and is the answer not in the manual?

Page 1 www.jasonl.com.au INSTALLATION GUIDE San Fran 3 Person Need help! Call us on Run Workstation 1300 527 665 Size: 1200mm Tools Required: Power screwdriver. Special Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s). They will not match your particular table/desk base and woods screws will be required to be screwed directly into the underside of the top.
Page 2 www.jasonl.com.au INSTALLATION GUIDE San Fran 3 Person Need help! Call us on Run Workstation 1300 527 665 Size: 1200mm COMPONENTS Table Top (1200x800) x3 San Fran Beam 120mm x4 Leg x8 SCREWS T connectors x4 Adjustable Foot x8 M8x12mm Dome Head x20 T connectors Cap x4 Leg Cable Cover x8 M8x20mm Cap Head x8...
Page 3 www.jasonl.com.au INSTALLATION GUIDE San Fran 3 Person Need help! Call us on Run Workstation 1300 527 665 Size: 1200mm Slide the 2 way and 3 way connectors over each leg, and securely Securely connect legs to rails lenghts using M8x12mm dome head screws (11). lock into place using M8x20mm cap head screws (13).
Page 4 www.jasonl.com.au INSTALLATION GUIDE San Fran 3 Person Need help! Call us on Run Workstation 1300 527 665 Size: 1200mm Optional Drill all M5x20mm self tapping screws (14) Loosely connect the shorter M8x12mm dome head bolt and slot nut through the through each leg into the worksurface.