Is Card Reader Present? ........................8 Does machine support CPD2? ......................8 Machine with no CPD2 support: Connect Card Reader to BluKey Select CARD connector ....8 Machine with CPD1/CPD2 support: Connect Card Reader to BluKey Select MDB harness ..8 Connect BluKey Select to Machine MDB connector ..............
RTC (real-time clock) support timekeeping in case of power outage. DEX connector can support remote DEX/UCX functionality. Installing BluKey Select takes just 2-3 minutes and requires only plugging in an appropriate cable harness into the machine. PayRange BluKey Select™ Mobile Payment System consists of: BluKey Select™...
Page 4
P a y R a n g e | B l u K e y S e l e c t ™ R e f e r e n c e M a n u a l Optional Card Harness (connects BluKey Select to Card reader installed in the Machine) •...
Page 5
P a y R a n g e | B l u K e y S e l e c t ™ R e f e r e n c e M a n u a l (TBD PICTURE) (TBD PICTURE) 6 / 2 9 / 2 0 2 1 P a g e 5 | 21...
Note: Because the PayRange device is inside the machine, the users won’t know it is there unless you tell them. The more you do to promote PayRange, the quicker they will become loyal users of your machines. d. Provide necessary tools and supplies BluKey Select device ii.
1. Disconnect power from the machine Important! Avoid electric shock and damage to the machine and BluKey Select. Always disconnect power from the machine BEFORE opening the machine cabinet. 2. Open machine cabinet Unlock door/panel with operator/service key if needed, open the machine door/panel and position as necessary for service.
LED. Manually pressing on service panel switch should let BluKey Select turn on solid blue LED. See section “Troubleshooting / Light Codes” on page 18 if BluKey Select does not power up or does not turn on solid blue LED.
If there is a PayRange decal for the machine, attach the decal to the machine. If there is a scan to pay QR code, enter Scan to Pay number from the decal Complete device registration: h.
4.91 RF Sensitivity (at 0.1% BER) Connector Pinouts a. “MACHINE” (MDB in) Connector (6-pin) “MACHINE” connector is suitable for powering BluKey Select from 24V AC, 12VDC and other low-voltage power supplies and has inputs for low-voltage signals. “MACHINE” BluKey Select...
Page 14
P a y R a n g e | B l u K e y S e l e c t ™ R e f e r e n c e M a n u a l “CARD” Connector BluKey Select Cable / Mating part...
Page 15
P a y R a n g e | B l u K e y S e l e c t ™ R e f e r e n c e M a n u a l “KEYPAD” Connector BluKey Select Cable / Mating part...
Molex 0022013037 (KK254) CONF Connector: Molex 0430250600 (Micro-Fit) KEYPAD Connector: Molex 0430252400 (Micro-Fit) Mechanical BluKey Select dimensions (inches) are given in the following figure. 6 / 2 9 / 2 0 2 1 P a g e 16 | 21...
Page 17
P a y R a n g e | B l u K e y S e l e c t ™ R e f e r e n c e M a n u a l 6 / 2 9 / 2 0 2 1 P a g e 17 | 21...
P a y R a n g e | B l u K e y S e l e c t ™ R e f e r e n c e M a n u a l Regulatory Approval Modification statement PayRange has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. United States This device complies with Part 15 of the FCC Rules.
Page 19
(Normal operation) flashes purple Downloading upgrades Mobile payment 1. Check if BluKey Select is in Ready state / BluKey Select LED does not work is solid blue. 2. Check if BluKey Select flashes “Transaction in progress” LED pattern during mobile payment. If not, check Internet / data connection on mobile device.
Page 20
Manage (see section “Error! Reference source not found.”). Machine does not 1. Check if machine accepts coins if BluKey Select harness is accept coins disconnected from the machine’s coin harness (can disconnect harness from BluKey Select). If not, replace coin acceptor and its harness.
BKSelect firmware is upgraded automatically, in the background. Contact PayRange support for additional information on firmware upgrades. Contacting PayRange Support For assistance with installing and operating your BluKey Select devices, please contact our support group: 1. For Technical Support: 2. For Sales and Marketing Support:...