Advertisement
Indicator
Microphone
Default Preset
Presets
If the preset 0 is predefined, the camera
moves to the set position after powering on.
If not, the camera moves to the default
position after powering on.
1. Adjust the image by remote control.
2. Press and hold a preset number for 3
seconds, and the indicator flashes twice. It
means the preset is successfully set.
3. Press the preset number, and the device
return to the defined position. Up to 6
presets can be set.
Restore to the default settings
Press and hold the buttons at the same time
for 3 seconds, and the red indicator flashes
three times.
Wireless pairing
Press and hold the buttons at the same time
for 3 seconds, and the white indicator flashes
continuously.
Advertisement
