Related Manuals for Lanpro LP-583ai
Summary of Contents for Lanpro LP-583ai
- Page 1 Wireless - Equipment LP-583ai 5.8GHz Band 802.11a/n Outdoor Radio with Integrated Antenna. Installation Guide LP583ai_IG_ENB01W LP-583ai 5.8GHz Band 802.11a/n Outdoor Radio with Integrated Antenna. Installation Guide www.lanpro.com...
- Page 2 Wireless - Equipment - LP-583ai Power LAN port: Connect with a PC or a router Power POE port: Connect device LAN port (supply power to the device) Note: Use LAN ports of the device to log in software Open your “Networks Connections”...
- Page 3 Wireless - Equipment - LP-583ai Double click “Internet Protocol (TCP/IP) Set your IP to “Use the following IP Address” Properties” Open your IE and enter in “192.168.110.1”, the admin password is “password”, enter in “Enter admin password” www.lanpro.com...
- Page 4 Wireless - Equipment - LP-583ai Get into the firmware and choose “Easy Setup” (Choose the Mode which you need) ADSL Mode (Dialing) Choose “ADSL”, enter the user name and password of your broadband, and set your own SSID, set your IP to 192.168.110.1, and save changes.
-
Page 5: Environment Setting
Wireless - Equipment - LP-583ai STEPS fOR SETTING UP: 1. Write down ADSL and password. 2. Set up IP address for Router (for example: 192.168.110.1). 3. Frequency setting (supports 2.3-2.7GHz). Note: In general, routers, mobile phone, laptop, only could receive 2.4GHz channel. - Page 6 Wireless - Equipment - LP-583ai www.lanpro.com...
- Page 7 Wireless - Equipment - LP-583ai STEPS Of SETTING UP: 1. Write down ADSL and password. 2. Set up IP address for Router (for example: 192.168.110.1). 3. Frequency setting. Note: In general, routers, mobile phone, laptop, only could receive 2.4GHz channel.
- Page 8 Wireless - Equipment - LP-583ai STEPS fOR SETTING UP: 1. Change WAN port into LAN port according to demand. 2. Set up IP address for Router (for example: 192.168.110.1). 3. Setting SSID, scan the available WiFi signal. 4. Write down the name of SSID (like: WiFi).
- Page 9 Wireless - Equipment - LP-583ai Repeater Mode Choose “Repeater”, scan WiFi name and enter in the password, and set your IP to 192.168.110.3 and save changes. Note: the cable needs to be connected with LAN port in Repeater Mode. STEPS fOR SETTING UP: 1.
- Page 10 Wireless - Equipment - LP-583ai ENvIRONMENT SETTING: Note: 1. If he device signal indicator light is on, and it can connect to QQ but can’t open the website, please click the left selection “connect”, DNS change to “Google DNS Server”.
- Page 11 Light 1.2, the signal is weak. Light 1.2.3, the signal is normal. Light 4, the signal is to strong. Light 1.2.3.4, the best signal. LanPro is continuously improving its products and reserves the right to change specifications and availability without prior notice www.lanpro.com...