Related Manuals for Lanpro LP-289ai
Summary of Contents for Lanpro LP-289ai
- Page 1 Wireless - Equipment LP-289ai 123 Manual for PtP and PtMP Modes setup. LP289ai_M123_ENF02W LP-289ai 123 Manual for PtP and PtMP Modes setup. www.lanpro.com...
- Page 2 Wireless - Equipment - 5.8 GHz - LP-289ai 123 Manual for PtP and PtMP Modes setup The following instructions will let you configure your LP-289ai in PtP and PtMP Modes. It is highly recommended to draw a detailed configuration diagram like the example shown in figure 1, in which 3 equipment in a PtMP connection will serve as a guide for you to their configuration, please remember that each equipment has a unique MAC address that you will require later when setting up this type of configuration.
- Page 3 Wireless - Equipment - 5.8 GHz - LP-289ai 123 Manual for PtP and PtMP Modes setup Connect a cable now from the PoE port: To Ethernet to the Connect power to the PoE as shown in figure 4. Switch or PC as shown in figure 3.
- Page 4 Wireless - Equipment - 5.8 GHz - LP-289ai 123 Manual for PtP and PtMP Modes setup Open your preferred browser and input the default address: 192.168.1.1, please see figure 7. Figure 7 In the validation window of figure 8 select: Continue to this website.
- Page 5 Wireless - Equipment - 5.8 GHz - LP-289ai 123 Manual for PtP and PtMP Modes setup In the window shown in figure 10, in the Wireless Setup menú proceed to select: Basic Settings, in: Operation mode select: Wireless Bridge then select: Apply, remember to verify the working frequency in which they must work.
- Page 6 Wireless - Equipment - 5.8 GHz - LP-289ai 123 Manual for PtP and PtMP Modes setup In this example we will generate the Keys and Encryption mode we will use. In order to do this, please go to the window shown in figure 13. In: Data encription select: WEP 64 bits, input the Passphrase and select: Generate keys.
- Page 7 Send a PING to any of the destination equipment, (See figure 17 a). Figure 17 a Enter the LP-289ai and in the window shown in figure 17b, check the option: Connections, verify that all the LP- 289ai are connected: Figure 17 b In the window shown in figure 17 c, enter in: Link Test and verify the status of the connection.
- Page 8 Wireless - Equipment - 5.8 GHz - LP-289ai 123 Manual for PtP and PtMP Modes setup It is recommended to change the administration password of your equipment, we remind you to save it in a safe place because loosing it implies opening the equipment so as to the reset it to factory values and losing the warranty.