Panasonic DVD-LS83E Service Manual page 21

<Caution to be taken when installing mono arm>
1. Roll the flexible cables as shown figure and install it to
mono arm cover.
2. Install mono arm.
3. Roll 3 turns of the flexible cable and Install the shaft
cover (R) to flexible cable.
4. Pass the flexible cable and the friction hinge into the
holes in the monitor cover.
5. Install the shaft covers to monitor cover.
DVD-LS83E / DVD-LS83EB / DVD-LS83EE / DVD-LS83EG / DVD-LS835EE / DVD-LS86EB / DVD-LS86EE / DVD-LS86EG
8.13. Inverter P.C.B.
1. Unlock the connector and remove the flexible cable.
2. Remove the 4 screws.
3. Remove the monitor support angle.
4. Remove the connector and remove the inverter P.C.B. and
2 speaker.
8.14. LCD panel
1. Remove the LCD panel into the direction of the arrow.
8.15. Replacing the fuse in the car
• • • • Replace only with the specified 125V/250V, 3A fuse. Use of
any other type can cause fire.
21
dc adaptor