JB INDUSTRIES DV-40S Quick Start Manual

FOR MORE INFORMATION
ON THE JB DV-40S
WIRELESS MICRON GAUGE
& FULL MANUAL VISIT US
AT WWW.JBIND.COM
CONNECT WITH US
TM
JB INDUSTRIES
WWW.JBIND.COM 800.323.0811 SALES@JBIND.COM
Form No. DV-40S-308
CONNECTING A SMART DEVICE
TO DV-40S
(CONTINUED)
6
Select your vacuum gauge from the list of
detected devices
IF THE DV-40S DOES NOT APPEAR IN THE LIST OF DETECTED DEVICES:
Make sure it is unpaired from any other, previously used, smart device.
Turn off both the DV-40s and smart device, and start over from step one.
7
Verify the connection by looking at the signal
strength indicator on the DV-40S
NOT CONNECTED
FULL CONNECTION
8
The DV-40S is now paired to your smart device
and is ready for use
IF THE DV-40S DOES NOT CONNECT AFTER SELECTING IT:
Make sure it is unpaired from any other, previously used, smart device.
Turn off both the DV-40s and smart device, and start over from step one.
DV-40S
WIRELESS MICRON GAUGE
JB INDUSTRIES
WWW.JBIND.COM 800.323.0811 SALES@JBIND.COM
TM