General Information; Returning A Vna Interface Kit To Agilent - Agilent Technologies 85097B Reference Manual

Troubleshooting

General Information

General Information
No operator serviceable parts inside. Refer servicing to qualified
WARNING
personnel.
If you suspect a bad calibration, or if your VNA does not pass the performance verification,
follow the steps as shown in
NOTE This manual contains limited information about VNA system operation. For
information about the VNA's operation, refer to the VNA's documentation. If
you need additional information, contact Agilent. See

Returning a VNA Interface Kit to Agilent

If any device in the interface kit requires service, contact Agilent for information on where
to send it. See Table 2-1 on page
packaging. Please include the following information with your returned interface kit.
• your company name and address
• a technical contact person within your company, and the person's complete telephone
number including country code and area code
• the model number and serial number of the interface kit
• the part number and serial number of each device
• type of service required
• a detailed description of the problem and how the device was being used when the
problem occurred (such as calibration or measurement)
2-2
Figure 2-1.
2-4. When transporting the kit, use original or comparable
Table 2-1 on page 2-4.
Chapter 2