Advertisement
Duration: 20 minutes
S T E P 1
Fill water tank with 1 packet of
descaling solution and 1/2 tank of
water.
S T E P 4
Press and hold button until you
see steady light turn off first, and
then start blinking quickly. It may
take approximately 7 seconds
before light starts to blink.
S T E P 7
Lock the lever. The light should
still be blinking fast. This is an
indication that you have entered
descaling mode. If not, start over
from Step 3 .
S T E P 2
With machine plugged in, empty
the capsule container and drip
tray and place back onto the
machine.
S T E P 5
Turn lever to the left to lock the
lever, then turn lever back to the
front to unlock the lever.
S T E P 8
Place 20 oz. receptacle
underneath spout. Press and
release button once to begin
descaling. Light will
continuously blink throughout
the process. Machine will
dispense solution intermittently.
E V O L U O
S T E P 3
Leave the lever in the unlocked
position. Press and release button
once and wait for steady light.
S T E P 6
Press and hold the button until
the light turns off and then starts
blinking quickly again. Steps 5
and 6 must be completed
within 45 seconds.
S T E P 9
Once the solution has finished
running through, machine should
be silent. Discard the solution
and return the empty receptacle
underneath the coffee spout.
4
Advertisement
