Connecting a projector
You can connect a projector (such as the Sony LCD projector) either directly to your computer or via the optional port replicator.
To connect a projector, proceed as follows:
1
Connect the power cord (1) of the projector into an AC outlet.
Plug the RGB signal cable (2) into the monitor/VGA connector (3) a on the computer or the port replicator.
2
3
Plug the audio cable (4) (not supplied) into the earphone connector (5) i.
4
Plug the RGB signal cable and the audio cable into the connectors on the projector (6).
n N
69
Connecting peripheral devices