Table of Contents
Advertisement
4. GO POWER! CONNECT
4.1 GO POWER! CONNECT
Welcome to the Go Power! Connect
which have built-in Bluetooth
For a complete list of products compatible with Go Power! Connect, please visit gpelectric.com.
4.1.1. DOWNLOAD AND INSTALLATION
Go Power! Connect
is available to users of iOS and Android phones, as well as tablets. Visit get.gpelectric.com/connect to
TM
download the app suitable for your device.
4.1.2. BLUETOOTH
DONGLE - PAIRING AND CONNECTING
®
1. Open Go Power! Connect
2. On your Phone or Tablet: pull down the screen to initiate a scan for available devices.
3. The first time you attempt to connect the phone will ask to 'pair' with the device. Enter the pin code. The default pin code is
000000.
4. Connection is complete.
If connection was not successful please visit https://gpelectric.com/support/battery-monitor-support/.
Always connect from within the Go Power! Connect
not find your Go Power! product.
Note
4.1.3 CHANGING THE BLUETOOTH PIN CODE
To prevent unauthorised connections to your device we recommended you change the PIN code. Avoid using obvious PIN codes
such as 111111 or 123456.
To change the PIN code: First complete your connection; then go to the Product Info page. To access that page, click the button
on the upper right. For some products it will be the settings icon:
After opening that menu press
For other products you'll find the
CONNECTIVITY INSTRUCTIONS
TM
manual. You can use the Connect app to configure, monitor and diagnose all our products
TM
capability or are equipped with a Go Power! Direct port.
®
TM
app. Do not connect from the device's system menu because the app will
TM
• •
, and click Product Info
•
button on the upper right, which takes you straight to the Product Info page.
i
Go Power! Connect
is available on:
TM
gpelectric.com | [page 7]
Advertisement
Table of Contents
