Page 2
Congratulations on purchasing your Go Power! MPPT Solar Controller Bluetooth Dongle! Record the unit’s model and serial number below. It is much easier and quicker to record this information now at the pre-installation stage. Model Number: Serial Number: Date of Install: Battery Bank Information: (size, install date, battery type) Product Packaging...
5. Does not contain external power supply, powered directly by the communication port 6. Communication distance of up to 15 meters The MPPT-PRO-60 is only able to accomodate the Bluetooth® Dongle OR the remote. It will not be able to accomodate both. 1.2 LED STATUS...
2. SYSTEM WIRING 1.5 PRODUCT DIMENSIONS 57.8 66.3 GP-MPPT-PRO-BT-1 SIDE VIEW External Dimensions: 66.3 X 51 X 15 mm Fixed holes dia: ø GP-MPPT-PRO-BT-1 FRONT VIEW 2. SYSTEM WIRING Note: Cable using the standard Ethernet cable (parallel line) connect. gpelectric.com | [page 5]...
3. SPECIFICATIONS TYPE GP-MPPT-PRO-BT-1 Input voltage 5 - 12V Stand-by power consumption 0.04W Run power consumption 0.05W Communication distance ≤ 15m Serial port baud rate Fixed baud rate 9600bps Communication methods RS232 Interface type RJ12 Connecting line Standard network cable (parallel cable) Size 66 x 51 x 15.5mm...
4. GO POWER! CONNECT 4.1 GO POWER! CONNECT CONNECTIVITY INSTRUCTIONS Welcome to the Go Power! Connect manual. You can use the Connect app to configure, monitor and diagnose all our products which have built-in Bluetooth capability or are equipped with a Go Power! Direct port. ®...
5. COMPATIBILITY - PHONES AND TABLETS 5.1 ANDROID DEVICES The minimum required Android version to run the Go Power! Connect app is 4.1. The minimum required Android version to connect to the Go Power! Connect via Bluetooth is 4.3. Access to location services required? Android 6 and later requires access permission for the Connectivity app to access location services.