Advertisement
socket.
4. Slide the endcaps so they will cover
the bulb socket
5. Insert legs into the tracks on the
bottom of the light fixture to elevate
the hood above the aquarium.
6. Plug the unit directly into
a G.F.C.I. outlet.
NOTE: Do not force the bulb into
socket. Handle with care!
CONNECTING FIXTURES:
Items required: T-Joint bracket
(Optional part. Sold separately)
1. Slide the T-Joint bracket into Track
A. Avoid any angles. Both hoods
must be level and placed on
a flat surface. (Diagram 2).
2. The T-Joint bracket must be
positioned a minimum of 4" from the
end of the fixture. (Diagram 3).
INSTALLING FIXTURE:
A. ELEVATED HOOD: Insert the legs
into the tracks on the bottom of
the light fixture to elevate the hood
above the aquarium. (Diagram 4).
B. HANGING: The T-Joint brackets
enable the fixture to be hung over
the aquarium. Secure the cable
to the T-Joint bracket. Follow
manufacturers guidelines for
installation on the hanger.
NOTE:
• To hang the hood straight, both
T-Joint brackets must be the same
distance from the end of the fixture.
• All units come equipped with a
replaceable fuse. If the light fixture
is not working, check fuse and
replace as needed (1amp/120v).
Replace with only genuine Helios
VHO T6 bulb. Other bulb may not
work properly in the fixture.
Diagram 1
Track A
Diagram 2
Diagram 3
®
Diagram 4
Endcaps
T-Joint Bracket
4 in.
Advertisement
