Page 1
WARNING Buyer/User assumes all responsability for safety and proper use not in accordance with the directions and sately labels. VHO T6 IV FIXTURE • High performance fluorescent light fixture • Modular extruded aluminum hood • Ultra bright lumen enhancing polished aluminum parabolic reflector • VHO electronic ballast • Compact design • Moisture resistant endcaps • Lumens output comparable only to metal halides • For thriving fresh/marine fish, coral and plat environmets...
Page 2
WARNING AND SAFEGUARD WARNING » This product may contain chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Wash you hand after handling the product. » Hg lamp contains Mercury. Manage in accordance with disposal laws. See: www.lamprecycle.org »...
Page 3
2. The T-Joint bracket must be Track A positioned a minimum of 4” from the T-Joint Bracket end of the fixture. (Diagram 3). Diagram 2 INSTALLING FIXTURE: A. ELEVATED HOOD: Insert the legs into the tracks on the bottom of the light fixture to elevate the hood above the aquarium. (Diagram 4). B. HANGING: The T-Joint brackets 4 in. enable the fixture to be hung over the aquarium. Secure the cable to the T-Joint bracket. Follow manufacturers guidelines for installation on the hanger. Diagram 3 NOTE: • To hang the hood straight, both T-Joint brackets must be the same distance from the end of the fixture. • All units come equipped with a replaceable fuse. If the light fixture is not working, check fuse and replace as needed (1amp/120v). Replace with only genuine Helios ® VHO T6 bulb. Other bulb may not work properly in the fixture. Diagram 4...
Page 4
Although this limited warranty gives you specific rights, you may have other rights that vary from state to state. This warranty is void if failure of the Helios® VHO T6 IV Fixture or any part, sealant or component thereof is due to (i) misuse, (ii) tampering,...