Download Print this page
SereneLife Dual Shot Basketball Arcade Game User Manual

SereneLife Dual Shot Basketball Arcade Game User Manual

Indoor/outdoor two-player basketball system with one audio options, 8 different games and large led scoreboard

Advertisement

Quick Links

Dual Shot Basketball Arcade Game
Indoor/Outdoor Two-Player Basketball System
with One Audio Options, 8 Different Games
and Large LED Scoreboard

Advertisement

loading
Need help?

Need help?

Do you have a question about the Dual Shot Basketball Arcade Game and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SereneLife Dual Shot Basketball Arcade Game

  • Page 1 Dual Shot Basketball Arcade Game Indoor/Outdoor Two-Player Basketball System with One Audio Options, 8 Different Games and Large LED Scoreboard...
  • Page 2: Parts Identifier

    IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS IN ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT. CHOKE HAZARD: THIS TABLE CONTAINS SMALL BALLS AND PARTS NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE. PARTS IDENTIFIER H1 - M6 x 35mm H2 - M6 x 90mm Phillips Head Bolt Phillips Head Bolt (1 pc)
  • Page 3 PARTS IDENTIFIER P4 - Right P1 - Left P2 - Right P3 - Left Middle Tube Assembly Lower Tube Assembly Lower Tube Assembly Middle Tube Assembly (1 pc) (1 pc) (1 pc) (1 pc) P5 - Front P6 - Upper Tube Assembly Tube (2 pcs) (1 pc)
  • Page 4 PARTS IDENTIFIER P9 - Electronic P10 - Electronic P11 - Mechanical P12 - Rim (2 pcs) Scorer (1 pc) Scorer Face Plate Scoring Arm Note: This is a special rim designed 3 pcs AA Batteries Required, (1 pc) (2 pcs) to avoid entanglement with the Not Supplied mechanical scoring arm.
  • Page 5 STEP 1 Connect P2 - Right Lower Tubes Assembly Spring Lock to P1 - Left Lower Tubes Assembly face backside using Spring Lock as shown in FIGURE 1. FIGURE 1 WARNING/PINCH HAZARD! Spring Lock Keep hands and fingers away from hinge until STEP 3 is complete and the hinge is in a controlled position.
  • Page 6 STEP 3 NOTE: Lastly, these six points Connect Middle Tubes Assembly from can now be tightened using a STEP 2 to Lower Tubes Assembly from phillips screwdriver or Phillips STEP 1 using Spring Locks. Next, using H1 Allen Wrench (T1) provided Bolt, H4 Washer and H5 Wing Nut connect and plyers.
  • Page 7 STEP 4 Connect P5 Front Tube Assembly using Spring Lock as shown in FIGURE 4. NOTE: Bungee Cord is an assembly aide and stays in place. FIGURE 4 Bungee Spring Lock Cord STEP 5 Bungee Connect P5 Front Tube Assembly to P1 - Left Cord Lower Tube Assembly and P2 - Right Lower Tube Spring Lock...
  • Page 8 STEP 6 Attach P12 Rim and P14 Rim Support Plate to the P7 Backboard using H3 Bolts, H7 Lock Washers and H5 Wing Nuts as shown in FIGURE 6. Attach P11 Mechanical Scoring Arms and P18 Mechanical Scoring Arm Support Plates to the P7 Backboard using H3 Bolts H7 Lock washers and H5 Wing nuts as shown in FIGURE 6.
  • Page 9 Spring Lock STEP 8 Attach Backboard assembly from STEP 7 to Frame assembly from STEP 5 as shown in FIGURE 8. Attach P6 Upper Tubes to P7 Backboard assembly using Spring Lock as shown in FIGURE 8. FIGURE 8 www.SereneLifeHome.com...
  • Page 10 STEP 9 Slide elastic loops and the sleeve Ramp Chute of P8 Ramp Chute onto P6 Upper Upper Sleeve Tubes as shown in FIGURE 9 and DETAIL C. At the front of P8 Ramp Chute, Elastic bring the ramp down and secure Loop using velcro strap as shown in FIGURE 9.
  • Page 11 STEP 10 Connect P11 Mechanical Scoring Arm sensor wires to P9 Electronic Scorer as shown in FIGURE 10. Secure Elastic Loops from P8 Ramp Chute to the back of P7 Back- board attached Wing Nuts as shown in FIGURE 10. Hook Elastic Loops over Wing Nuts in six locations as shown in FIGURE 10.
  • Page 12 Install P16 Control Box Wire into Hook and Loop Straps. FIGURE 11 ELECTRONIC SCORER OPERATION Installing Batteries: Using a screwdriver, unscrew lid and open the battery box. Insert 3 “AA” batteries (not included) in the order of polarity as shown on the inside cover.
  • Page 13 CONTROL BOX OPERATION • Press "ON/OFF" to activate the scorer. • Scoreboard "HOME" shows "01" (pre- set game 1). • Press "SELECT UP and DOWN" to select a game. • Press "SELECT UP and DOWN" to enter selected game mode. •...
  • Page 14 3. Battle Back • Press "PLAY" to enter game 3. • Press "UP/Down" to select playing time, 30/45/60 seconds. • Press "PLAY" to begin the game. • Shot made in "HOME" frame, +2 points scored display on "HOME" board and -2 points for "VISITOR".
  • Page 15 • Player with more points scored wins ( LED will flash on player with higher score) • Game is finished when a player scores 99 points • Press "PLAY" to restart this game 6. Around the World • Use tape to mark the shooting lines. •...
  • Page 16 Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.com...