APPLICATION
GMAW
P-GMAW
GTAW
P-GTAW
PAW
P-PAW
Table 1 - Voltage Sensor Installation
Connect the Sensor Cable from the Volt-Amp Sensor to the Sensor Connector on
•
the rear panel of the ATC-3 (Fig 2-1).
Connect the Power Cable to the rear mating POWER connector on the rear panel of
•
the ATC-3 (Fig 2-1).
This completes the cable installation.
•
RED (+) LEAD
BLACK (-) Lead
Electrode
Work
Electrode
Work
Work
Electrode
Work
Electrode
Work
Electrode
Work
Electrode
8