Table of Contents
Advertisement
Using your notebook
Connecting a power source
You can use either an AC adapter or a rechargeable battery pack as a power source.
Using the AC adapter
To use the AC adapter, proceed as follows:
1
Plug the cable attached to the AC adapter (1) into the DC In connector (2) on the computer.
2
Plug one end of the power cord (3) into the AC adapter.
3
Plug the other end of the power cord into an AC outlet.
The LED at the end of the power cord turns green (4) when the AC adapter is plugged in.
Use your notebook only with the supplied AC adapter.
If the main unit is connected to a port replicator, you can only use the DC In connector on the port replicator.
To disconnect your notebook completely from mains voltage, unplug the AC adapter.
Make sure that the socket outlet is easily accessible.
n N
23
Advertisement
Table of Contents
