Page 1 Go to the Sony Online Support site specifications and preinstalled software information. For Sony software information, click Start and select Welcome to VAIO Life. computer, and welcome to the online VAIO ® to view the VAIO Computer Specifications, which list your computer's hardware ®...
Page 2: Caring For Your Computer
Caring for Your Computer This section provides information on how to safely use your Sony computer.  Applying Ergonomics  Storing Your Computer  Using Cables and Connections  Cleaning Your Computer  Handling the LCD Screen Page 2...
Page 3: Applying Ergonomics
Applying Ergonomics Your computer is a portable device and can be used in a variety of environments. Whenever possible, you should apply the following ergonomic considerations:  Position of your computer — Place the computer directly in front of you as you work. Keep your forearms horizontal, with your wrists in a neutral, comfortable position while using the keyboard, touch pad, or external mouse.
Page 4: Storing Your Computer
If the computer is brought directly from a cold location to a warm one, moisture may condense inside your computer. In this case, allow at least one hour before turning on your computer. If any problems occur, unplug your computer, and contact your Sony Service Center. ...
Page 5: Using Cables And Connections
Using Cables and Connections  Use only specified peripheral equipment and interface cables.  Do not use cut or damaged connection cables.  If the telephone company makes a service call to your home or office and determines that your computer is responsible for a problem, the telephone company may bill you for the service call.
Page 6: Cleaning Your Computer
Cleaning Your Computer  Clean the computer with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer.
Page 7: Handling The Lcd Screen
Handling the LCD Screen  Direct sunlight can damage the LCD. Be careful when using the computer near a window.  Do not scratch the LCD or exert pressure on it. This can cause a malfunction.  Using the computer in low temperature conditions may produce a residual image on the screen. This is not a malfunction.
Page 8: Powering Your Computer
Powering Your Computer Your VAIO computer comes with a battery and an AC adapter. This chapter explains how to install and use these supplied ® accessories to power your computer. It also describes ways you can efficiently utilize the battery as a power source. ...
Page 9: Using Ac Power
Using AC Power The supplied battery is not charged when you receive your computer. To use your computer immediately, use the supplied AC adapter as the power source. While the computer uses AC power it automatically charges the battery if it is inserted. Using the Battery for more information on installing and using your battery.
Page 10 Connecting the AC adapter To connect the AC adapter Plug the AC adapter cable into the DC IN port. Connecting the AC Adapter to the Com puter Plug the power cord into the AC adapter and an AC outlet. Use only the supplied AC adapter with your computer. Page 10...
Page 11 Turning on the computer To open and turn on the computer Lift the cover while holding the bottom of the computer firmly. Opening the Com puter Press the power button on the right until the power indicator turns on. Turning on the Com puter If you continue to press the power button, the computer turns off.
Page 12: Using The Battery
The brightness of your computer screen automatically dims when you switch from AC power to battery power. To increase the brightness, press the Fn and F5 keys, and then press the Up Arrow For safety and/or optimum performance, Sony recommends using genuine Sony rechargeable battery packs. or Right Arrow key.
Page 13 Inserting a battery To insert a battery Turn the computer over, and slide the UNLOCK/LOCK latch on the bottom of the computer to the UNLOCK position. Align the grooves on the battery with the tabs on the back of the computer. Inserting a Battery Slide the battery into the computer until it clicks into place.
Page 14 Removing a battery If you are not using the computer for an extended period of time, remove the battery from the computer to avoid damaging the battery. Remove the battery when the computer is off. To remove a battery Turn the computer over, and slide the UNLOCK/LOCK latch on the bottom of the computer to the UNLOCK position.
Page 15 Locating battery information You can view the remaining battery charge and other miscellaneous battery information on the Battery Information toolbar, PowerPanel window, and Power Meter window. The battery icons that appear on the Taskbar Notification area and Power Meter window indicate the current status of the installed battery.
Page 16 To view the Power Meter window if you are using battery power  Double-click the battery icon in the Taskbar Notification area. The Power Meter window appears. Power Meter Page 16...
Page 17 Charging a battery You will need to charge the battery if battery power drops below 10 percent or you have not used the battery for a long time. The lithium-ion battery supplied with your computer may be recharged at any time, whether you wait until the battery is completely or partially discharged.
Page 18 Notes on batteries  Never leave the battery in temperatures above 140°F (60°C), such as under direct sunlight or in a car parked in the sun.  While the battery is in use or being discharged, the battery heats up. This is normal and is not cause for concern. ...
Page 19 Frequently asked questions How do I know when the battery is charged? To determine the remaining battery charge, see When is the computer using AC power? When the computer is directly connected to the AC adapter, it uses AC power, even if a battery is installed. When should I recharge the battery? ...
Page 20: Conserving Battery Power
Conserving Battery Power You may use the power saving modes and PowerPanel battery power may significantly extend your computing time, depending on how you use your computer.  Using power saving modes  Using PowerPanel utility  Frequently asked questions utility or power schemes to conserve battery power.
Page 21 Using power saving modes In addition to the normal operating mode, which allows you to turn off specific devices to save power, your computer has two distinct power saving modes: Standby and Hibernate. Use the Standby and Hibernate power saving modes to override a profile setting or initiate an immediate action.
Page 22 Using PowerPanel utility The PowerPanel utility enables you to select and customize a predefined power management profile to conserve battery life. The following table describes all the predefined power management profiles in PowerPanel. You can customize the settings for all of the following profiles, except the Disable Power Management profile. Icon Description Maximum Performance...
Page 23 To select a profile Right-click the CPU icon icon descriptions. Select Profiles, and click the profile on the shortcut menu. The profile settings are implemented instantly. See Using PowerPanel utility for descriptions of available profiles. When you use the battery to power your computer, your system automatically selects the Maximum Battery Life power management profile by default.
Page 24 HDD Standby Timer Controls the time it takes the system to turn off power to the hard disk drive when the system is idle. This setting only turns off power to the hard disk drive. Slows the proc es s or s peed. O n s elec ted models only. Page 24...
Page 25 Frequently asked questions Can my computer enter Hibernate mode while using battery power? Your computer can enter Hibernate mode while using battery power, but some programs and peripheral devices prevent the system from entering Hibernate mode at all. If you are using a program that prevents the system from entering Hibernate mode, save your data frequently.
Page 26: Internet And Network Connections
Internet and Network Connections  Internet Connections  Network Connections  Bluetooth Connections  Connecting Another VAIO Computer Page 26...
Page 27: Internet Connections
Connection Wizard guides you through the process of connecting to the Internet and choosing an Internet service provider (ISP) or setting up an existing account. When you connect to the Internet, you can register your VAIO services, and gain access to Sony Computing Support. ...
Page 28 Setting up a dial-up Internet connection Before you can connect to the Internet, you need to connect your computer to a telephone line via a telephone cable (not supplied). Once you set up your telephone cable, you're ready to connect to the Internet. To connect a telephone cable Locate the Modem jack on your computer.
Page 29 Follow the on-screen instructions. Page 29...
Page 30 Setting up an Ethernet Internet connection Your computer accommodates both 10BASE-T and 100BASE-TX Ethernet connections, with data transfer speeds of between 10 and 100 Mbps. To connect an Ethernet cable Locate the Ethernet port on your computer. For location information, see "Locating Controls and Ports" in the Setting Up chapter of your printed VAIO Connecting an Ethernet Cable Plug one end of the Ethernet cable into your computer's Ethernet port...
Page 31 Customizing your Internet connection The Internet Properties dialog box enables you to change the way you view the Internet. You can change your home page, fonts, language, and colors. You can also regulate content and set browsing preferences. To open the Internet Properties dialog box Click Start on the Windows ®...
Page 32  Make sure the telephone number the program is dialing is correct.  Make sure the software you are using is compatible with the computer's modem. (All preinstalled Sony programs are compatible.) Why is my modem connection slow? Your computer is equipped with a V.90 compatible modem. Many factors may influence modem connection speed, including telephone line noise or compatibility with telephone equipment, such as fax machines or other modems.
Page 33: Network Connections
Network Connections With a Sony computer, you can easily set up or connect to a variety of networks. The New Connection Wizard and Network Setup Wizard make it easy to gain access to remote and local area networks (LANs) using wireless, Ethernet, or dial-up connections.
Page 34 Using Ethernet and dial-up connections For setting up local area networks (LANs), Ethernet is a widely installed technology. Your computer accommodates both 10BASE-T and 100BASE-TX Ethernet connections, with data transfer speeds of between 10 and 100 Mbps. To connect to a local area network using a telephone or Ethernet cable Connect an Ethernet or telephone cable to your computer.
Page 35 To connect to a remote network using a telephone or Ethernet cable Connect an Ethernet or telephone cable to your computer. See dial-up Internet connection From the Start menu, point to All Programs, Accessories, Communications, and click New Connection Wizard. Click Next.
Page 36 A wireless local area network (LAN) is a network in which you can connect to a LAN through a wireless (radio) connection. You can opt to purchase a Sony Wireless LAN Access Point to set up a LAN. The wireless LAN access point is designed for building a wireless LAN environment. Because a wireless LAN configuration requires no wiring, you can operate multiple computers more freely than ever before.
Page 37 From the Available wireless networks list, select the name of the network in which you want to connect. If you do not see the network name, see If required, type the network key in the Network key box. (If necessary, ask the administrator for the key.) Retype the network key in the Confirm network key box.
Page 38 The following steps are for networks that require a network key. If you do not know the network key or are not sure a network key is required, see the network administrator or the guide that accompanied your access point for more information.
Page 39 Click Advanced. The Wireless Network Connection Properties dialog box appears. Wireless Network Connection Properties Click Add. The Wireless network properties dialog box appears. Wireless Network Properties Type the name of the network you want to connect to in the Network name (SSID) box. If available, make sure the Data encryption (WEP enabled) check box is selected.
Page 40 11. Click to select This is a computer-to-computer (ad hoc) network; wireless access points are not used. 12. Click OK. The network name appears in the Preferred networks list box. 13. Click Advanced. The Advanced dialog box appears. Adv anced 14.
Page 41 Checking your network connection status Whether you have a wireless, Ethernet, or dial-up connection, you can check the status of that connection. To check your network connection status Click Start on the taskbar, and click Control Panel, Network and Internet Connections, and Network Connections.
Page 42 Wireless LAN communication occurs on divided frequency bands known as channels. Third-party wireless LAN access point channels may be preset to different channels from Sony devices. If you are using a wireless LAN access point, refer to connectivity information contained in your access point instructions.
Page 43 Two computers with built-in wireless LAN may loose a peer-to-peer network connection if the encryption key is changed. You can either change the encryption key back to the original profile or restart both computers. Page 43...
Page 44: Bluetooth Connections
Bluetooth Connections Bluetooth wireless technology provides short-range connectivity without the need for cabling. When the Bluetooth functionality is turned on, your computer can exchange data and images with other compatible Bluetooth devices within a range of up to 32 feet. With Bluetooth technology, your computer transmits a radio frequency of 2.4 GHz.
Page 45 Using Bluetooth technology Using Bluetooth technology, your computer can communicate with:  Compatible devices with integrated Bluetooth functionality, such as computers, mobile telephones, personal digital assistants (PDAs), mice, and keyboards.  Compatible devices with an installed Bluetooth adapter, such as computers, printers, mice, and keyboards. Some Bluetooth devices may not work with your computer, depending on the type of equipment, software version, and other factors.
Page 46 Establishing wireless connections The "Switch wireless devices" window enables you to select a wireless connection: Bluetooth, Wireless LAN, or Bluetooth and Wireless LAN. Bluetooth technology is designed for a short-range connection of up to 32 feet (10 meters), while Wireless LAN technology has a wider connection range of up to 328 feet (100 meters).
Page 47 Click Device Discovery. The Device Discovery window appears and searches for other nearby Bluetooth devices. Dev ice Discov ery When a device is detected, it appears in the The device currently found window next to the New icon BlueSpace NE — Dev ices Currently Found In The device currently found area, click to select the device in which you want to connect.
Page 48 Page 48...
Page 49 Authenticating devices Authentication is a security feature, which prevents unauthorized communication between Bluetooth time Bluetooth devices attempt to communicate with each other, a common passkey must be entered before the two devices are allowed to exchange data. If the detected device has the same passkey as your computer, then authentication is successful, and your computer can communicate with the Bluetooth device.
Page 50 In the Passkey text box, type your own passkey or use the passkey that is provided. Click Next. On the Bluetooth device in which you are trying to connect, a message may appear, stating that a Bluetooth device requires authentication. If this message appears, follow the on-screen instructions. On the Bluetooth device, type the same passkey as the one entered on your computer.
Page 51 Page 51...
Page 52 Renaming the Bluetooth USB Device The Bluetooth device installed on your computer has an assigned name that you may not recognize. Renaming this device makes it easy for you to identify your computer during authentication. To rename the Bluetooth USB device From the Start menu, click Control Panel.
Page 53 Sending data and image files When a connection is made between your computer and another Bluetooth You can click Service Discovery for a list of available services that can be performed during your connection. If the File Push and Image Push icons appear, then your computer can send and receive data and image files. For information about services, see To send data files Establish a connection with another Bluetooth device.
Page 54 Using connection services When a connection is made between your computer and another Bluetooth list of available services that can be performed during your connection. When clicked, the purple Service Discovery icons search for a connection method. For more information about the different services, see the BlueSpace NE help guide: On the BlueSpace NE window, click Help.
Page 55 Setting Bluetooth preferences The Bluetooth Options feature enables you to set hardware preferences for discovery, connection, and authentication. To access Bluetooth Options Click Start, Control Panel, Printers and Other Hardware, and Wireless Link. The Wireless Link window appears. On the Bluetooth tab, click Options. The Bluetooth Options window appears.
Page 56 Setting BlueSpace NE preferences The BlueSpace NE Settings feature enables you to set software preferences for changing folder location, responding to device discovery, displaying windows, and more. To set BlueSpace NE settings Verify that your computer is not connected to another Bluetooth device. From the BlueSpace NE window, click Setting, and then click BlueSpace NE settings.
Page 57 Adding a Bluetooth device Your computer can connect to several compatible Bluetooth dial-up Internet connections, digital cameras, and personal digital assistants (PDAs). For specific device connection information, see the documentation that accompanied the device. You can also get connection information in the Bluetooth and BlueSpace NE help guides To access the Bluetooth help guide From the Start menu, click Control Panel.
Page 58 Disconnecting a Bluetooth device To disconnect or remove a device If the BlueSpace NE window is not already open, click the Bluetooth - Standing by icon Notification area. In the Devices currently found window, select the device you want to disconnect or remove. From the BlueSpace NE window, click Device.
Page 59 Additional information  The data transfer rate varies, depending on the following conditions:  Obstacles, such as walls, located between devices  Distance between devices  Material used in walls  Proximity to microwaves and cordless telephones  Radio frequency interference and other environmental conditions ...
Page 60 Frequently asked questions Why can't other Bluetooth devices discover my computer?  Make sure both devices have the Bluetooth feature enabled.  Your computer and the device may be too far apart. Wireless Bluetooth technology works best when the devices are within 32 feet (10 meters) of each other.
Page 61 From the Start menu, click Control Panel. Click Printers and Other Hardware, and then click Wireless Link. The Wireless Link window appears. On the Bluetooth tab, click Options. The Bluetooth Options window appears. In the Authentication Agent box, click to select the Enable Authentication Agent check box. Click OK. Why is my Bluetooth connection slow? ...
Page 62: Connecting Another Vaio Computer
N K is a trademark of Sony us ed to des ignate that a produc t c ontains an I E E E 1 3 9 4 c onnec tion. T he i.LI...
Page 63 Connecting VAIO computers When you connect two VAIO computers, you can use one computer to edit, copy, or delete files on the other computer. You can also print from a printer attached to either computer. To connect VAIO computers Plug one end of the i.LINK cable into the i.LINK port on each computer. Click Start on the Windows ®...
Page 64 Disconnecting VAIO computers You can disconnect two VAIO computers when the computers are on or off. ® To disconnect VAIO computers when the computers are on Close all open files that are shared with the connected computers. Unplug the i.LINK cable from the i.LINK port on each computer.
Page 65: Frequently Asked Questions
N K is a trademark of Sony us ed only to des ignate that a produc t c ontains an I E E E 1 3 9 4 c onnec tion. T he i.LI...
Page 66: Cds And Dvds
CDs and DVDs  Inserting and Ejecting CDs or DVDs  Playing and Writing to CDs and DVDs Page 66...
Page 67: Inserting And Ejecting Cds Or Dvds
Inserting and Ejecting CDs or DVDs Avoid using adhesive labels to identify your CDs or DVDs. Adhesive labels may damage the optical drive if they come off while the disc is in the drive. To insert a disc Turn on the computer or exit a power saving mode (Standby or Hibernate) if one is active. For more information, Using power saving modes.
Page 68 into the manual eject hole next to the Eject button. Lift the disc from the drive. Push the drive tray gently to close it. Page 68...
Page 69 Playing and Writing to CDs and DVDs  Playing CDs  Writing to CDs  Playing DVDs  Writing to DVDs (on selected models only)  Frequently asked questions Your computer plays and records CDs and DVDs, depending on the model you purchased. Check your specifications for the type of optical drive installed on your computer and use the table below to see which types of media your optical drive supports.
Page 70 Playing CDs Before you play an audio CD, you may need to enable your computer's audio feature. To enable the audio feature Click Start on the Windows ® The System Properties dialog box appears. As a shortcut, you can press Fn + Windows key Select the Hardware tab, and in the Device Manager box, click Device Manager.
Page 71 Page 71...
Page 72 Writing to CDs Before you write files to a CD-RW or CD-R disc, read the following notes to avoid a computer malfunction and ensure the best results:  Deactivate the screen saver and exit anti-virus software.  Deactivate memory-resident disc utilities to avoid data loss. ...
Page 73 Do not strike or shake the computer while writing data to a disc. T he read/write drive letter des ignation may vary, depending on your s ys tem's hardware c onfiguration. Page 73...
Page 74 Playing DVDs Your computer is equipped with an optical drive that enables you to watch DVDs and most DVD-R discs on your computer. You can view the video on your computer or a multimedia monitor. See projector for more information. To play a DVD while using AC power Close all open programs.
Page 75 Writing to DVDs (on selected models only) Use the table shown on Playing and Writing to CDs and DVDs To write files to a DVD-R or DVD-RW Connect the AC adapter to the computer. See Insert the disc into the optical drive. See Click Start, All Programs, and select the DVD software program you want to use from the submenu.
Page 76 Frequently asked questions How do I maintain CDs and DVDs?  Avoid touching the surface of the disc with your fingers. Fingerprints and dust on the surface of the disc may cause reading errors.  Try using canned compressed air to clean dusty discs. ...
Page 77 For more information about power management profiles, see What do I do if the optical drive isn't playing my CD or DVD properly?  Make sure the disc was inserted into the drive with the label facing up.  Make sure the necessary program(s) is installed according to the manufacturer's instructions. ...
Page 78  If your computer is using battery power, make sure the battery is inserted properly and is charged. See Battery for more information.  If the display mode is set to external display, use the Fn+F7 key combination. See information. Using the Selecting a display for more...
Page 79: Printer Connections
Printer Connections  Printing With Your Computer Page 79...
Page 80: Printing With Your Computer
Printing With Your Computer Your computer is compatible with many popular printers. However, to ensure the best performance, printers must be compatible with the Microsoft Windows ®  Connecting a printer  Disconnecting a printer  Frequently asked questions operating system installed on your computer. ®...
Page 81 Connecting a printer You can easily connect a printer to your computer or port replicator (if applicable). If you wish to purchase a port replicator, shop Sony online at http://www.sonystyle.com/vaio The New Hardware Wizard enables you to easily install the printer software, but some printers require separate driver software installation.
Page 82 Restart your computer by clicking Start, Turn Off Computer, and Restart. If the New Hardware Wizard appears, follow the on-screen instructions. Make sure the computer recognizes the printer. Follow these steps:  Click Start, Control Panel, Printers and Other Hardware, and then Printers and Faxes. If the computer recognizes the printer, it will be listed in the Printers and Other Hardware window.
Page 83 Disconnecting a printer You can disconnect the printer cable when the computer is on or off. Disconnecting a printer when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. To disconnect a printer Make sure all print jobs are completed.
Page 84 Frequently asked questions Why can't I print a document?  Make sure the printer is on, and the printer cable is securely connected to the ports on your printer and computer. Connecting a printer for more information.  Make sure the printer is compatible with the Microsoft ...
Page 85: Computer Features
Computer Features  Using the Touch Pad  Using Memory Stick Media  Using the Programmable Buttons  Using the Multilingual User Interface Language Option  Changing the Window Design of Sony Programs Page 85...
Page 86: Using The Touchpad
Using the Touch Pad A pointing device called a touch pad is located in front of the keyboard. You can point to, select, drag, and scroll objects on the screen using the built-in touch pad.  Describing the touch pad ...
Page 87 Describing the touch pad Locating the Touch Pad Touch Pad Action Description Sliding one finger Equivalent to using a mouse to place the pointer on an item. Tapping once Equivalent to pressing the left button once. Tapping twice Equivalent to pressing the left button twice. Sliding one finger while pressing the left button Moving your finger along the right edge of the touch pad only with programs that support a touch pad scroll feature.)
Page 88 Customizing the touch pad Sony Notebook Setup lets you customize, enable, or disable the touch pad. Open the Mouse Properties dialog box to set your touch pad and mouse preferences, such as changing pointers, enabling or disabling the tapping feature, clicking both buttons simultaneously, and adjusting the touch pad speed.
Page 89 Frequently asked questions What do I do if the touch pad does not work?  Try restarting your computer. Follow these steps: Press the Windows key Press U. The Turn off computer window opens. Press R to restart the computer. ...
Page 90: Using Memory Stick Media
Using Memory Stick Media This compact, portable, and versatile recording medium has a data capacity exceeding that of a floppy disk. Memory Stick media is specially designed for exchanging and sharing digital data with compatible products. Because it is removable, the media can be used for external data storage.
Page 91 Memory Stick media do not support video file playback directly from the media. Copy the video file to your hard disk drive and then play back the file. computers support Memory Stick PRO media for data storage ® software are not compatible with the new Memory Stick PRO media. Sony http://www.sony.com/pcsupport regularly for the latest information on the Page 91...
Page 92 Inserting Memory Stick media The media slot accommodates only one Memory Stick media at a time. To insert Memory Stick media Insert the Memory Stick media with the arrow facing up and toward the Memory Stick media slot. Inserting the media in the wrong direction may damage the connector pins. Carefully slide the Memory Stick media into the slot until it clicks in place.
Page 93 Depending on the model you purchased, the Sony Memory Stick window may appear when you insert a Memory Stick media. From this window, you can choose to view, print, copy or organize your Memory Stick images or data. If the Sony...
Page 94 Write-protecting Memory Stick media Memory Stick media is designed with a write-protect tab to protect data from accidental erasure or overwriting. Move the ® tab to the right or left to set or release write-protection. When the write-protect tab of the Memory Stick media is set to LOCK, data cannot be recorded or erased.
Page 95 Formatting Memory Stick media Memory Stick media is formatted for immediate use when you purchase it. If you need to reformat Memory Stick media, use ® the Memory Stick Formatter that is preinstalled on your computer. For more information about using Memory Stick Formatter, refer to Formatter Help.
Page 96 Removing Memory Stick media If the Memory Stick media is removed prematurely, a blue screen with a message may appear prompting you to continue or ® exit. Reinsert the media into the slot and press Enter to continue. This enables the media to finish reading or writing data. To remove Memory Stick media Wait a minimum of 10 seconds after the Memory Stick media finishes reading or writing data before removing the media.
Page 97 Using recorded music requires permission of the copyright holders.  Sony is not responsible for music files that cannot be recorded from a CD or downloaded from other sources. Can I copy images from a digital video camera using Memory Stick media? Yes, and you can view video clips that you have recorded with Memory Stick media-compatible video camera recorders.
Page 98: Using The Programmable Buttons
Your computer comes equipped with two built-in buttons. Locating the P1/P2 Buttons To assign a function to a programmable button Click Start, and point to All Programs and then Sony Notebook Setup. From the Sony Notebook Setup submenu, click Sony Notebook Setup. Click the P1/P2 Buttons tab.
Page 99: Using The Multilingual User Interface Language Option
Using the Multilingual User Interface Language Option (Microsoft Windows XP Professional only) ® ® After you have initially setup your new VAIO Professional operating system. The multilingual user interface (MUI) language option changes the text controlled by Windows XP Professional operating system. Menus, help files, and icons generated by Windows XP Professional are shown in your selected language.
Page 100 Changing Numbers, Currency, Time, and Date Formats You can change your operating system's number, currency, time, and date formats to coordinate with your chosen country or language settings. To change these formats Click Start on the Windows taskbar, and then click Control Panel. Click Date, Time, Language and Regional Options, and click Regional and Language Options.
Page 101: Changing The Window Design Of Sony Programs
Click << or >> to view the designs. Click Apply to select a design that appears in the center window. The UI Design Selector window design changes. The window design for your Sony software will match the UI Design Selector window. Click OK.
Page 102 Mice and Keyboards  Using the Keyboard  Connecting External Mice and Keyboards Page 102...
Page 103: Using The Keyboard
Using the Keyboard Your keyboard is very similar to a typewriter's, but your computer keyboard has additional keys that perform specific computer-related tasks.  Key descriptions  Combinations and functions with the Windows key  Indicator Lights  Combinations and functions with the Fn key Page 103...
Page 104 Key descriptions Description Numeric keypad Contains the keys found on a typical calculator. Use the numeric keypad area to type numbers or to perform mathematical calculations, such as addition and subtraction. Numbers appear on the front beveled edge of the numeric keys.
Page 105 The Applications key displays a shortcut menu of context-sensitive choices. Pressing this key is the equivalent of clicking the right mouse button. Page 105...
Page 106 Combinations and functions with the Windows key Combination Function Displays the VAIO Help and Support Center window. +Tab Switches the selected button on the taskbar. Displays the desktop. Displays the Windows Explorer window. Displays the Search Results window, where you can find a file or folder. This is the equivalent of selecting Search from the Start menu.
Page 107 Indicator Lights Indicator Function Power Turns on when the power to the computer is on, blinks in Standby mode, and turns off when the computer is in Hibernate mode or off. Battery Turns on when the computer is using battery power, blinks when the battery is running out of power, double-blinks when the battery is charging.
Page 108 Combinations and functions with the Fn key Feature Function Fn+F3 Toggles the built-in speakers off and on. Fn+F4 Adjusts the built-in speaker volume. An on-screen display appears notifying you when a change occurs. To increase volume, press Fn+F4 and then press To decrease volume, press Fn+F4 and then press Fn+F5 Adjusts the brightness of the computer screen (LCD).
Page 109 Connecting External Mice and Keyboards Your computer is compatible with many popular mice and keyboards. To function properly, the device you connect must be compatible with the Microsoft Windows ® computer's built-in keyboard and key functions, see  Connecting a mouse or keyboard ...
Page 110 Connecting a mouse or keyboard Your computer can be on or off when connecting a universal serial bus (USB) mouse or keyboard. If you connect the mouse or keyboard when the computer is on, you may need to restart the computer for it to recognize the device. See asked questions for more information.
Page 111 Disconnecting a mouse or keyboard You can disconnect a USB mouse or keyboard when the computer is on or off. Disconnecting the mouse or keyboard when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. To disconnect a mouse or keyboard ...
Page 112 Frequently asked questions What do I do if the computer doesn't recognize the mouse?  Make sure the mouse is securely plugged into the port. See  Restart the computer with the mouse connected to the computer. What do I do if the pointer doesn't move when I use the mouse? ...
Page 113 Floppy Disks and PC Cards  Using a Floppy Disk Drive  Using PC Cards Page 113...
Page 114: Using A Floppy Disk Drive
Using a Floppy Disk Drive You can connect a floppy disk drive to your computer. The floppy disk drive enables you to read or write data to a floppy disk.  Connecting a floppy disk drive  Inserting and removing floppy disks ...
Page 115 Connecting a floppy disk drive You can connect a floppy disk drive when your computer is on or off. Connecting the drive when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. To connect a USB floppy disk drive Close any active programs to prevent data loss.
Page 116 Inserting and removing floppy disks To write data to a disk, use one that is not write-protected or disable the write-protect feature. The floppy disk drive cannot write data to a disk if it is inserted into the drive improperly. To insert a floppy disk Hold the floppy disk with the label facing up.
Page 117 Protecting floppy disks  Do not open the shutter manually or touch the surface of the floppy disk.  Keep floppy disks away from magnets, direct sunlight, and heat sources. Page 117...
Page 118 Disconnecting a floppy disk drive You can disconnect a USB floppy disk drive when the computer is on. Disconnecting the drive when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. To disconnect a floppy disk drive when the computer is on Close all programs that access the floppy disk.
Page 119 Storing a floppy disk drive Fold the floppy disk drive cable and connector into the side compartment on the floppy disk drive. Storing a Floppy Disk Driv e Page 119...
Page 120 Frequently asked questions Why doesn't the Safely Remove Hardware icon The computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does not appear, follow these steps: Close all programs that were accessing the floppy disk drive.
Page 121: Using Pc Cards
Using PC Cards Your computer includes one PC Card slot. A PC Card enables you to connect devices such as an optical drive or floppy disk drive. See your VAIO Computer Specifications for the type of PC Card that is compatible with your computer. This slot is ®...
Page 122 Inserting PC Cards To insert a PC Card Make sure the front label of the PC Card is facing up. Push the PC Card gently into the slot. The system automatically detects the PC Card. Do not force a PC Card into the slot; this may damage the connector pins. When a PC Card is inserted, do not place your computer in a bag or case.
Page 123 Removing PC Cards You can remove PC Cards while the computer is on or off. PC Cards draw power from the computer when they are inserted into the PC Card slot, whether or not you use the card. If you are not using your PC Card and you are using a battery as a power source, remove the PC Card from the PC Card slot to conserve battery power.
Page 124  See the instructions that accompanied your PC Card. You may need to install driver software if you are not using a Sony PC Card. Why doesn't my computer recognize attached devices? For some PC Cards, if you alternate between normal power operation and the Standby or Hibernate modes while the card is inserted into the PC Card slot, the computer may not recognize the PC Card or the connected device.
Page 125: Port Replicator
Port Replicator  Locating Ports and Jacks  Connecting a Port Replicator  Connecting a Flat-Panel Display  Disconnecting a Port Replicator Page 125...
Page 126 A port replicator is a device that attaches to your notebook and contains additional jacks and ports, such as USB ports. A port replicator may come with your computer, depending on the model you purchased. If you wish to purchase a port replicator, shop Sony online at http://www.sonystyle.com/vaio The printer port on this port replicator is intended for printer connections only.
Page 127: Connecting A Port Replicator
Connecting a Port Replicator Connect a port replicator to the computer while the computer is off. Use the AC adapter (not the battery) to power the computer while it is connected to a port replicator. Moving the computer with the port replicator attached could disconnect the AC adapter or power cord, and may cause the computer to lose power or malfunction.
Page 128 Plug the AC adapter into the DC IN port on the port replicator, and plug the power cord into the AC adapter and an AC outlet. The power indicator turns on. Connecting an AC Adapter to a Port Replicator Turn on the computer. Page 128...
Page 129: Connecting A Flat-Panel Display
The port replicator includes a Digital Visual Interface (DVI-D) port, which enables you to connect your computer to a flat-panel display. To connect to a flat panel display, you must use a DVI-D or DVI-D/I display cable. If you wish to purchase a cable, shop Sony online at http://www.sonystyle.com/vaio Your port replicator also includes a Monitor (VGA) port.
Page 130 Disconnecting a Port Replicator Disconnecting a port replicator when the computer is in a power saving mode (Standby or Hibernate) or the battery power is low may result in data loss or a computer malfunction. You can disconnect a port replicator when the computer is on or off.
Page 131: Audio And Video Connections
Audio and Video Connections  Using i.LINK Digital Video Recorders  Using Computer Monitors and Projectors  Using Speakers  Using Microphones Page 131...
Page 132: Using I.link Digital Video Recorders
N K is a trademark of Sony us ed to des ignate that a produc t c ontains an I E E E 1 3 9 4 c onnec tor. T he i.LI...
Page 133 Connecting an i.LINK digital video recorder You can connect a digital video (DV) recorder when the computer is on or off. Connecting the DV recorder when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. Before you connect an i.LINK digital video recorder ...
Page 134 Disconnecting the i.LINK digital video recorder You can disconnect the digital video recorder while the computer is on or off. Simply unplug the i.LINK cable from the i.LINK port on the computer. Disconnecting the cable when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction.
Page 135 Using a digital video camera recorder Your computer comes with preinstalled driver software that is compatible with most Sony digital video camera recorders. If you purchased a camera that comes with its own driver software, install these drivers before you use the camera.
Page 136 N K is a trademark of Sony us ed only to des ignate that a produc t c ontains an I E E E 1 3 9 4 c onnec tion. T he i.LI...
Page 137: Using Computer Monitors And Projectors
Using Computer Monitors and Projectors You can connect an external display (such as a computer monitor or a projector) to your computer.  Connecting a computer monitor  Connecting a multimedia computer monitor or projector  Selecting a display  Disconnecting a computer monitor or projector Page 137...
Page 138 Connecting a computer monitor Your computer can display images to the computer screen (LCD), to an external computer monitor, or to both the LCD and external monitor while your computer is on. To connect a computer monitor Make sure the computer monitor is plugged into an AC outlet. Plug the display cable into the Monitor (VGA) port If it is not already on, turn on the computer monitor.
Page 139 Connecting a multimedia computer monitor or projector You can connect a multimedia device, such as a multimedia computer monitor or projector, to your computer. Connecting a multimedia device enables you to display images on your computer screen (LCD), the multimedia device, or both. To connect a multimedia computer monitor or projector Plug the device into an AC outlet.
Page 140 Selecting a display You can connect external displays to your computer while it is on. When you connect an external display to your computer, you can switch the display between the computer screen (LCD), the external display, or both, using shortcut keys or the Display Properties settings.
Page 141 Click the red button on the upper left corner of the display. Click Apply. Click OK. For more information, click Help. If you cannot see your movie or DVD on the external display, change the monitor or TV setting by clicking on the Primary icon on the display panel of your choice.
Page 142 Disconnecting a computer monitor or projector You can disconnect the external computer monitor or projector by unplugging the monitor (VGA) cable from your computer's port. Disconnecting the external display when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction.
Page 143 Frequently asked questions How to I reduce the size of the image displayed from the projector? If the screen resolution is set higher than 1024x768, the entire image may not appear within the frame of the display. Reduce the screen resolution to 1024x768 or lower. Right-click the desktop and click Properties from the shortcut menu.
Page 144: Using Speakers
Your computer comes with built-in stereo speakers. If you wish to enhance the sound quality of your computer, you can purchase and connect external speakers. If you want to purchase speakers, make sure the speakers are designed for computer use. You can shop Sony online at ...
Page 145 Connecting speakers You can connect speakers to your computer to enhance the sound quality of your computer. Do not place floppy disks on the speakers. The speakers' magnetic field may damage the data stored on the floppy disks. To connect speakers to your computer Turn down the volume of the speakers.
Page 146 Disconnecting speakers You can disconnect external speakers when the computer is on or off. Simply unplug the speaker cable from the Headphone jack on the computer. Page 146...
Page 147 Adjusting the volume To adjust the volume for playing CDs and DVDs, use the Volume icon playing CDs or DVDs does not adjust the volume for recording sound files. You can only adjust the recording volume in the Recording Control window. See for instructions on how to open this window.
Page 148 Enabling the audio feature If you do not hear sound when playing a CD or DVD, you may need to enable the audio feature. To enable the audio feature Click Start on the Windows ® Click Performance and Maintenance, and click System. The System Properties window appears. Select the Hardware tab, and click Device Manager.
Page 149 Frequently asked questions Why won't my speakers work?  Make sure the speakers are properly connected and the volume is turned up loud enough to hear sound.  Your speakers may not be designed for computer use.  If the speakers have a mute button, set the button to off. ...
Page 150: Using Microphones
Using Microphones You can connect an external microphone to your computer to enable sound input. Make sure your microphone is designed for computer use. If you wish to purchase a microphone, shop Sony online at your local retailer.  Connecting a microphone ...
Page 151 Connecting a microphone Plug the microphone cable into the Microphone jack on the computer. Connecting a Microphone See the guide that accompanied your microphone for more information on its installation and use. A protruding dot loc ated next to the M ic rophone jac k dis tinguis hes this jac k from the H eadphone jac k. Page 151...
Page 152 Disconnecting a microphone You can disconnect an external microphone when the computer is on or off. Simply unplug the microphone cable from the Microphone jack on the computer. Page 152...
Page 153 Using a microphone to record sound You can record messages, memos, etc. by connecting a microphone to the Microphone jack To record from a microphone Double-click the Volume icon From the Options menu, click Properties. The Properties dialog box appears. Click to select the Recording option in the Adjust volume for box, and click OK.
Page 154 Frequently asked questions Why doesn't my microphone work? If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the Microphone jack on the computer. See Connecting a microphone for more information. Page 154...
Page 155: Memory Upgrades
Memory Upgrades Before you upgrade your computer's memory, make sure you read the safety information in For the type of module and amount of memory installed on your computer, see the Computer Specifications.  Precautions and Procedures  Removing and Installing Memory Modules ...
Page 156: Precautions And Procedures
Precautions and Procedures Sony recommends that memory upgrades be performed by an authorized Sony Service Center. To find the nearest center or agent, go to: http://www.sony.com/pcsupport. The procedures described below assume familiarity with the general terminology associated with personal computers and with the safety practices and regulatory compliance required for using and modifying electronic equipment.
Page 157: Removing And Installing Memory Modules
Removing and Installing Memory Modules Make sure you read the safety information in When installing a memory module, do not open the module package until you are ready to install it. The package protects the module from Electrostatic discharge (ESD). To remove a memory module Turn off the computer and all attached devices.
Page 158 Turning the Keyboard Touch a metal object (such as the connector panel on the back of your computer) to discharge static electricity. Avoid touching any part of the motherboard or other components inside the computer. Remove the memory module by pulling out the tabs (see arrows No. 1), and pulling out the module in the direction of arrow No.
Page 159 Make sure the system recognizes the new memory module. See Confirming Added Memory Capacity for more information. Page 159...
Page 160: Confirming Added Memory Capacity
Click Start on the Windows ® Select Sony Notebook Setup from the submenu. The Sony Notebook Setup dialog box appears. On the About This Computer tab, make sure the System Memory displayed in the System Information box matches the amount of memory installed.
Page 161: Troubleshooting
This section describes how to solve some basic problems you may encounter when using your computer. For more troubleshooting topics refer to the VAIO Computer User Guide. Many problems have simple solutions, so refer to these ® sources before you contact Sony Computing Support (http://www.sony.com/pcsupport).  Troubleshooting Your Computer Page 161...
Page 162: Troubleshooting Your Computer
Select Exit (Save Changes), and press Enter. The Setup Confirmation window appears again. Select Yes, and press Enter. The computer restarts. If this occurs on a regular basis, contact Sony Computing Support (http://www.sony.com/pcsupport). What do I do if the message "Operating system not found" appears when my computer starts, and why won't Windows start? ...
Page 163 Turn off the computer. Remove any peripheral devices connected to the computer. Restart the computer. Press the F2 key when the Sony logo appears. The BIOS Setup window appears. Press the Right Arrow key Press the Down Arrow key SETUP items appears.
Page 164 Press and release Alt to highlight the menu bar, and press the Right Arrow Down. Press Enter. Press R to select restart. If this procedure does not work, press and hold the power button or slide and hold the power switch until the computer turns off.
Page 165: Support Options
Support Options If you have questions about your computer or the preinstalled programs, refer to the following sources for answers in the sequence listed below. Page 165...
Page 166: Sony Support Information
Sony Computing Support This service provides instant access to information on commonly encountered problems. Type a description of the problem and the Knowledge Database searches for the corresponding solutions online. You can visit Sony Computing Support at: http://www.sony.com/pcsupport. Computer Quick Start provide information on how to ®...
Page 167: Program Support Information
Telephone 888-4-SONY-PC (888-476-6972) CLIÉ Converter Sony Electronics Inc. CLIÉ Converter software is a plug-in program that converts Giga Pocket playback on your Sony CLIÉ handheld. After converting your Video Capsules, you can use CLIÉ Converter software to ® ® transfer them to Memory Stick media or to save them to your hard disk drive for transfer to your CLIÉ...
Page 168 Sony Electronics Inc. PictureGear Studio still image management software displays still images from your hard drive or a Sony digital still camera. The still images appear in a convenient light-table format so that you can easily view the contents of an entire folder, create , Movie Maker, Simulation Game Pack, Media ®...
Page 169 Telephone 888-4-SONY-PC (888-476-6972) Screenblast ACID ® ® Sony Pictures Digital Networks Use the amazing Screenblast ACID ® can slice out long hours from the music-making equation and unlock the doors of your creativity by picking, painting, and playing your songs.
Page 170 VAIO Product Registration is an integrated registration program for both Sony Electronics and Microsoft Corporation. By registering with Sony, you enable Sony to notify you of software and hardware issues that may affect your user experience. Microsoft directs the data to Sony Electronics. Sony uses the registration data for warranty and product support purposes and the analysis of customer feedback on Sony computer features.
Page 171 888-4-SONY-PC (888-476-6972) VAIO Music Services Sony Electronics Inc. Download music from the Web, create your own albums, or have CDs sent straight to your house with VAIO Music Services. The ultimate place on the Web for music lovers to find information about their favorite artist and get all of the latest music news.

Sony PCG-Z1WAP VAIO User Guide (primary manual) User Manual

Quick Links

Troubleshooting

Related Manuals for Sony PCG-Z1WAP VAIO User Guide (primary manual)

Summary of Contents for Sony PCG-Z1WAP VAIO User Guide (primary manual)

Table of Contents