Connecting A Projector - Sony PCG-TR5MP Hardware Manual

Hardware Guide

Connecting a projector

You can connect a projector (such as the Sony LCD projector) directly to your computer or via the port replicator.
To connect a projector, proceed as follows:
1 Plug the RGB signal cable (1) into the monitor/VGA
connector (2) identified by the
2
Plug the audio cable (3) (not supplied) into the earphone
connector (4) identified by the
3 Plug the RGB signal cable and the audio cable into the
connectors of the projector (5).
4 Connect the power cord (6) of the projector into an AC
outlet.
✍
Under certain circumstances, you may not be able to display the computer
LCD screen and an external display or a projector at the same time.
You can toggle the output between the computer LCD-screen and the
external monitor by pressing the key combination <Fn>+<F7>.
symbol.
symbol.
n N
85
Connecting peripheral devices