Using Pc Cards - Sony PCG-TR5MP Hardware Manual

Hardware Guide

Using PC Cards

Your computer includes one or two PC Card slots (depending on your model). PC Cards allow you to connect portable external
devices. Please see your printed Specifications sheet to see if your computer has one or two PC Card slots.
You do not need to shut down your computer when inserting a PC Card.
Inserting a PC Card
To insert a PC Card, proceed as follows:
1 Insert the PC Card into one of the PC Card slots with the front label facing upwards.
2
Gently push the PC Card slot into the connector.
The PC Card is automatically detected by your system.
The Safely Remove Hardware icon appears in the system tray.
✍
Some devices may not function properly if you repeat returning to Normal mode from Standby mode or Hibernate mode.
The computer will return to its original state if you restart it.
If your computer has two PC Card slots, the PC Card slots can accommodate (at the same time) two Type I, two Type II or one Type III PC Card. These slots are compatible
with Card Bus ports.
If your computer has two PC Card slots, use the lower slot for PC Type III cards.
Some PC Cards may require you to disable idle devices when using the PC Card. You can use Sony computer Setup to disable devices.
Make sure you use the most recent software driver provided by the PC Card manufacturer.
n N
40
Using your VAIO computer