Getting help
The optional PCGA-UFD5 (USB) floppy disk drive is not recognized as drive A
To set the UFD5 to A, proceed as follows :
1
Turn the system power on.
2
Connect the UFD5.
3
Select Control Panel from the Start menu.
4
Double-click System.
5
Select the Hardware tab, then click Device Manager.
6
Select Universal Serial Bus controllers, then Y-E Data USB Floppy.
7
From the Action menu, click Uninstall.
8
Keep clicking OK until the Confirmation of deletion of device message appears.
9
Select Scan for hardware changes from the Action menu.
The UFD5 is recognized as drive A.
When I remove the Memory Stick™, an error message appears
Insert the Memory Stick™ in the slot again and press <Enter>. Wait until the active application finishes, then
remove the Memory Stick™. If the message confirms eject of the Memory Stick™, click OK.
About sound
My speakers are not producing sound
❑
The built-in speakers may be turned off. Press <Fn>+<F3> to turn on the speakers.
❑
The speaker volume may be turned to the minimum. Press <Fn>+<F4>, and then press
the volume.
❑
If your computer is powered by battery, check that the battery is inserted properly and that it is charged.
❑
If you are using an application that has its own volume control, check that the volume is turned up.
n N
90
or
to increase