LG AN-MR600 Manual page 51

BATTERIES
1. Installing Batteries
* Please read this manual carefully.
* Press the top of the battery cover, slide it back,
and lift the cover as shown below.
* To replace batteries, open the battery cover, replace
alkaline batteries (1.5 V, AA) matching
to the label inside the compartment, and close the
battery cover. Be sure to point the remote control at
the remote control sensor on the TV.
* To remove the batteries, perform the installation
actions in reverse. Don't mix old or used batteries with
new ones. Close the cover securely.
* Open the battery cover to find the label.
2. Precautions
* After replacement of the battery, use the remote control following pairing in accordance with
user manual.
* If the unit does not operate after replacement of battery, reattempt pairing in accordance with
the user manual.
* If the remote controller is not being used for prolonged period of time, remove the battery
from the unit.
* Do not dismantle or exert heat to the battery.
* Do not drop battery or exert extreme impact that may even cause the case to be damaged.
* Do not immerse the battery in water.
* There is danger of explosion if a the battery is inserted incorrectly.
* Properly dispose of used batteries
and ends
51