Table of Contents
Advertisement
Getting help
There may be condensation in the drive. Remove the disc and leave the drive open for approximately
one hour.
The optional PCGA-UFD5/A (USB) floppy disk drive is not recognised as drive A
To set the UFD5/A to A, proceed as follows :
1
Turn the system power on.
2
Connect the UFD5/A.
3
Select Control Panel from the Start menu.
4
Double-click System.
5
Select the Hardware tab, then click Device Manager.
6
Select Universal Serial Bus controllers, then Y-E Data USB Floppy.
7
From the Action menu, click Uninstall.
8
Keep clicking OK until the Confirmation of deletion of device message appears.
9
Select Scan for hardware changes from the Action menu.
The UFD5/A is recognised as drive A.
About sound
My speakers are not producing sound
The built-in speakers may be turned off. Press <Fn>+<F3> to turn on the speakers.
The speaker volume may be turned to the minimum. Press <Fn>+<F4>, and then press
increase the volume.
If your computer is powered by battery, check that the battery is inserted properly and that it is charged.
If you are using an application that has its own volume control, check that the volume is turned up.
Check the volume controls in Windows
®
.
n N
91
or
to
Advertisement
Table of Contents
