Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the Wi-Fi
indicator LED will be flashing).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and holding down the feeding button until the Wi-Fi indicator LED
is flashing.
Add device through network
5.
Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6.
Select the product type from the list of options in the app
(Other > Smart Pet Feeder with Camera).
7.
Ensure that the device is in pairing mode, with the Wi-Fi indicator LED flashing,
and tap "Confirm light is flashing".
Advertisement
