Advertisement
Table Setup & Disassembly
The AndyMark Robot Competition table can split into 3 sections for
transportation and storage.
Section Assembly
1. Slide each section together. Ensure the dowel pins in each outer section t into the holes on the center section.
The latches will be closest to the north side of the table.
W
2. Secure sections together using 4X Flat Head Screws. These screws will t in the countersunk holes on the four
corners of the inner panel.
4X - Flat Head Screw
Bottom View
For more information visit AndyMark.com/Table
N
S
Required Tools
#2 Phillips Screwdriver
E
Advertisement
Table of Contents
Related Manuals for AndyMark Robot Competition Table
Summary of Contents for AndyMark Robot Competition Table
- Page 1 Table Setup & Disassembly Required Tools #2 Phillips Screwdriver The AndyMark Robot Competition table can split into 3 sections for transportation and storage. Section Assembly 1. Slide each section together. Ensure the dowel pins in each outer section t into the holes on the center section.
- Page 2 The Flat Head Screws can be re-threaded into the brackets to ensure they don’t get lost. To prevent damage and table warping, store in a dry environment free from extreme temperature changes. For more information visit AndyMark.com/Table...
Need help?
Do you have a question about the Robot Competition Table and is the answer not in the manual?
Questions and answers