Advertisement
Available languages
Available languages
15. When the residue is difficult to clean, please soak it with warm water, then brush in the same direction
with a sponge, and wash out with clear water.
6. Do not place the product at a high place or under pressure, also keep away from fire and heat sources.
7. Before cleaning, please wait the jug cool avoid being scalded.
8. After cleaning, use a dry towel to wipe the water on the motor base and cover, then place it on the
ventilation condition.
DEMONSTRATION
CHAPTER VIII MALFUNCTION ANALYSIS
Malfunction
Materials are not broken
Repeat alarm 4 souds and
indicating E1
Repeat alarm 4 souds and
indicating E2
Overflow
Burnt
Cause Description
Low voltage
Materials excessive or exiguous
Water exiguous
The thermistor open circuit or
heating plate does not work
Over-temperature protection.
Possible Cause: materials
excessive or water exiguous
Excessive of water or materials
Water exiguous or Materials
excessive
Solution
Use a voltage regulator
Follow the standard to put some
water or food
Follow the standard to put some
water or food
Send to local service center
Follow the standard to put some
water or food
Follow the standard to put some
water or food
Follow the standard to put some
water or food
23
A-96
Advertisement
