Table of Contents
Advertisement
Connecting peripheral devices
Connecting a projector
You can connect a project (such as the Sony LCD projector) directly to your notebook or via the port
replicator.
To connect a projector, proceed as follows:
1
Plug the RGB signal cable (1) into the monitor/
VGA connector (2) identified by the
2
Plug the audio cable (3) (not supplied) into the
earphone connector (4) identified by the
symbol.
3
Plug the RGB signal cable and the audio cable
into the connectors of the projector (5).
4
Connect the power cord (6) of the projector into
an AC outlet.
You may not be able to display the computer's LCD and the external
display together, depending on the types of computer display and
projector used.
You can toggle the output between the notebook LCD-screen and the
external monitor by pressing the key combination <Fn>+<F7>.
symbol.
n N
66
Advertisement
Table of Contents
