Advertisement
Ceiling mounting
positions
Tamper
spring
To ensure correct operation, connect the power jumper
across the PIN header on the battery PCB located on the
front of the detector (shown in Figure 2).
The unit is powered by 6 x AA alkaline batteries. These
are supplied tted. Should batteries require
replacement, only use speci ed batteries whilst
observing correct polarity as shown in Figure 4.
Batteries that have been removed must be disposed of in
accordance with your country's relevant Waste Electrical
and Electronic Equipment (W.E.E.E) regulations.
Please see programming manual for log on procedure
details.
The detector's sensitivity can be set via the detectors DIL
switches on the head section (shown in Figure 5)
Please see ZR432 detector installation sheet for settings.
©2018 EMS Ltd. All rights reserved
OFF
ON
Placed on the market by
UTC Fire & Security.
Part no. 68701. See
Installation Sheet 1631.
ZR432-2 Radio Multisensor (Optical/Heat) Detector
FCZ-174-001
EN54-7
EN54-5 Class A 1
Made in South Africa
0359-CPD-0112
Figure 3
OFF
Placed on the market by
UTC Fire & Security.
Part no. 68701. See
Installation Sheet 1631.
To reassemble the unit, place the detector and head
ZR432-2 Radio Multisensor (Optical/Heat) Detector
section into the xed ceiling mount (ensuring that
FCZ-174-001
locating lugs line up) and turn clockwise to achieve a
EN54-7
Figure 4
positive location.
EN54-5 Class A 1
0359-CPD-0112
Made in South Africa
Ensure that the tamper switch operates correctly. The
switch should make contact with the ceiling mount
plate.
Please Note: The nal commissioning, detector
sensitivity detection settings and hand over of the
wireless re system to the end user is the responsibility
of the re installation contractor.
2 / 4
MK107 Iss 14 12/07/2019 AJM
Speci cation
Operating
Temperature
Storage
Temperature
L744-4
L946-5
Humidity
Supply
IP Rating
Operating
Frequencies
Output Transmitter
Power
Dimensions
L744-4
ON
L946-5
Weight
Figure 5
Regulatory information
Manufacturer
Year of
manufacture
Certi cation
Certi cation body
CPR Certi cate
DOP
©2018 EMS Ltd. All rights reserved
Approved to
-10 to +70°C (ambient)
Application
European Union
0 to +35°C
directives
Up to 95% non-condensing
6x AA Alkaline (Panasonic LR6AD
Powerline / Varta 4006 Industrial)
IP23
868 MHz
Variable 0-14 dBm
113mm (Ø) 40mm (D)
(No detector head)
113mm (Ø) 90mm (D)
(With detector head)
0.30kg (No detector head)
0.40kg (With detector head)
Contact information
EMS Ltd.
For contact information, see www.utc reandsecurity.com
Technology House, Sea Street,
Herne Bay, Kent, CT6 8JZ,
United Kingdom
See serial number label inside unit
12
0359, 0370
0359-CPR-0128 (module)
0370-CPR-1818 (head)
3 / 4
EN54-5
EN54-7
EN54-25
Indoor use only
EMS declares that the radio
equipment type Ziton Wireless
Multisensor Detector is in
compliance with Directive
2014/53/EU. The full text of the EU
declaration of conformity is
available at the following internet
address:
www.utcfssecurityproducts.eu/dop/
2012/19/EU (WEEE directive):
Products marked with this symbol
cannot be disposed of as unsorted
municipal waste in the European
Union. For proper recycling, return
this product to your local supplier
upon purchase of equivalent new
equipment, or dispose of it at
designated collection points.
For more information see
www.recyclethis.info
Dispose of your batteries in an
environmentally friendly manner
according to your local regulations.
MK107 Iss 14 12/07/2019 AJM
Advertisement
