Page 1
$50 if we use your photo in our advertising materials. Before and after pictures will receive an additional $50. A deck or patio that is nicely furnished helps us communicate to prospective customers how nice a ShadeTree ®...
Page 2
* center to center of outside tracks. Please allow an additional 3” outside the centers of the Mid Beam Fitting two outermost tracks to accommodate mounting hardware and base fittings ShadeTree Cool Living, LLC — For questions or assistance call 800-894-3801 .
Page 3
Center notch for 5’-4” or 4’-2-1/4” alignment at house) 2” Allow 2” beyond center of bracket When mounting to house, brackets must be attached to well-secured wood, brick or stone. ShadeTree Cool Living, LLC — For questions or assistance call 800-894-3801 .
Page 4
Projection Track to the Header Track (positioned on centerline of Header Track.) * For the Capri II, assemble both header tracks. Left Corner Fitting T-fitting Header Track ShadeTree Cool Living, LLC — For questions or assistance call 800-894-3801 .
Page 5
The adjusting screws can be used to adjust the tension. Do not over-tighten as this Roller could increase the chance for canopy damage in high winds. ShadeTree Cool Living, LLC — For questions or assistance call 800-894-3801 .
Page 6
To remove the excess canopy material, use the edge of the Fabric Clamp as a guide when cutting with a sharp utility knife (Fig. 2F). ShadeTree Cool Living, LLC — For questions or assistance call 800-894-3801 .
Page 7
Of course, attractive landscaping and patio furniture will be a factor in selecting pictures to be used. Architects, builders and installers will receive credit mentions in the advertising. ShadeTree Cool Living, LLC — For questions or assistance call 800-894-3801 .
Need help?
Do you have a question about the Capri and is the answer not in the manual?
Questions and answers