Connecting A Tv - Sony PCG-GRT915M Hardware Manual

Connecting peripheral devices

Connecting a TV

You can connect a TV to the computer or to the optional port replicator.
To connect a TV to the computer, proceed as follows:
1 Plug one end of the audio/video cable (1) (optional)
into the AV Out connector (2) (yellow) and the other
end into the TV.
2 Plug the power cord of the TV (3) into an AC outlet.
3 Switch the input channel of the TV to external input.
4 Set up the TV configuration system.
See the manual supplied with your peripheral for more information on
installation and use.
If you insert a DVD in your DVD-ROM drive to watch a video on your TV, the <Fn>+<F7> key combination might not activate the function to toggle
between your LCD and TV.
Solution:
1. Eject your DVD from your computer.
2. Once the DVD is ejected, toggle between your LCD and your TV with the combination <Fn>+<F7>.
Your image displays now on both LCD and TV. Re-insert your DVD to launch your DVD software.
If the display resolution of your computer is more than 1024 x 768 pixels, a part of the image cannot be displayed on your TV. The hidden area on
your TV can be seen by moving the cursor on your computer. If you want to display the full image, change the display resolution of your computer to
1024 x 768 pixels or lower.
n N
66