ZIGBEE zipato BULB2 Quick Installation Manual

QUICK INSTALLATION GUIDE
v1.1
TRADEMARKS
Zipato and the Zipato logo are registered Trademarks. All other
product names mentioned herein may be trademarks or registered
trademarks of their respective companies.
IMPORTANT NOTICE
Although Zipato has attempted to ensure the accuracy of the content
of this manual, it is possible that this document may contain technical
inaccuracies, typographical, or other errors. Zipato assumes no
liability for any error in this publication, and for damages, whether
direct, indirect, incidental, and consequential or otherwise, that may
result from such error, including, but not limited to loss of data or
profit. Zipato provides this publication "as is" without warranty of
any kind, either express or implied, including, but not limited to
implied warranties of merchantability for a particular purpose. The
published information in the manual is subject to change without
notice. Zipato reserves the right to make changes in the product
design, layout, and driver revisions without notify cation to its
users. This version of the Installation guide supersedes all previous
versions.
TAKE CARE OF YOUR SAFETY
Display extreme caution when using ladders or steps, please follow
manufacturer's instructions. Be careful when using hand and power
tools and follow the manufacturer's guidelines when using them.
Take care that the correct tools are used. Wear goggles or protective
clothing where required.
INTRODUCTION
THANK YOU
FOR BUYING ZIPATO BULB 2.
Zipato Bulb 2 has 5 color channels available for you to adjust:
RED, GREEN, BLUE, WARM WHITE and COLD WHITE. Zipato
make your home smart
Bulb 2 can be used to add color to your home or just to lighten
it up in any white color tone you desire. By using Zipatile or
Zipabox (or other ZigBee) home controller, you can control the
bulb from anywhere in the world, by using any smartphone
(iOS or Android). Also, you can automatically set colors of your
Zipato Bulb 2 to indicate events using the Zipato rule creator.
SPECIFICATION
BASE E27 / E26
VOLTAGE rgbw2.zbee27 is 100-240V, rgbw2.zbee26 is 120V
WIRELESS COMMUNICATION PROTOCOL ZigBee
POWER
CCT(K) 2700-6500
CRI
BEAM ANGLE
PF
LUMEN 806 lm
LIFETIME (H)
LINE VOLTAGE DIMMER
Zipato does not recommended the use of a line voltage dimmer with
bulbs. The reason is that each bulb contains a radio and by reducing
or removing power through a line voltage dimmer may cause the
connected bulb to not function properly.
For dimming, Zipato recommends using a compatible ZigBee controller
and assoicated application (i.e., Zipato's Android or iOS application) or
a compatible wireless switch that uses the same wireless protocol as
the bulb.
INSTALLATION
1. Screw the Zipato Bulb 2 into the socket
2. Activate inclusion mode on your ZigBee controller
3. Turn ON your wall switch
4. Inclusion process will be started automatically
DEVICE INCLUSION
If your switch or fixture is OFF, or is turned OFF, then control and
communication from the App, or wireless switch, to the LED Bulb is
lost.
INCLUSION PROCEDURE
The following are the general procedures for the ZigBee bulb to be
included/excluded into the network:
1. Screw the Zipato Bulb 2 into the socket.
2. Turn on the bulb with your wall switch to apply power to the bulb.
- If you're not using a wall switch, then use your alternate
method to apply power to the bulb.
3. Activate the inclusion mode on your ZigBee
controller or gateway.
- This may also be done through your associated app,if your
ecosystem has that capability.
4. Toggle the wall-switch, from OFF, then to ON.
- Or use your alternate method to toggle power to the bulb from
OFF, then to ON.
5. The bulb will flash once if it has been successfully included/
excluded into your ZigBee network.
Note: If you are using 3rd party ZigBee Controller or Gateway,
please refer to 3rd party's instruction on how to add a new devices
to your network.
www.zipato.com
FACTORY RESET PROCEDURE
Physically switch the bulb on and off six (6) times for intervals
of 0.5-2 seconds. After the 6th time, the bulb will flash twice
indicating that it's successfully reset.
9.5W
80
240
0.7
When the bulb flashes twice this indicates that it's been
25000 successfully reset.
BULB MODE
To indicate its status, the bulb will flash in different modes.
FACTORY RESET MODE
The bulb will flash twice when it is powered on in reset mode or
factory mode.
INCLUSION MODE
The bulb will flash once when it has been included into the
network.
EXCLUSION MODE
The bulb will flash once and then dim to 5% when it has been
excluded outside the network. If you want the bulb to be re-
included, you need re-power the bulb, and then execute the
inclusion process.
TROUBLESHOOTING
Having trouble installing your new product?
Zipato's website contains the latest user documentation and
software updates for Zipato products and services:
www.zipato.com
You can also find answers in the Zipato Community at:
community.zipato.com
Zipato Support: support@zipato.com
LIMITED PRODUCT WARRANTY
GENERAL TERMS
Nothing in this Limited Product Warranty affects your statutory
rights as a consumer. The Limited Product Warranty set forth
make your home smart
below is given by Tri plus grupa d.o.o. (Europe) (herein referred to
as "ZIPATO"). This Limited Product Warranty is only effective upon
presentation of the proof of purchase. Upon further request by
ZIPATO, this warranty card has to be presented, too.
EXCEPT AS EXPRESSLY SET FORTH IN THIS LIMITED WARRANTY,
ZIPATO MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. ZIPATO EXPRESSLY
DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED
WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED
BY LAW ARE LIMITED IN DURATION TO THE LIMITED WARRANTY
PERIOD. TO THE EXTENT ALLOWED BY LOCAL LAW, THE
REMEDIES IN THIS WARRANTY STATEMENT ARE CUSTOMER'S
SOLE AND EXCLUSIVE REMEDIES AGAINST ZIPATO. THEY DO
NOT, HOWEVER, AFFECT OR RESTRICT THE RIGHTS YOU HAVE
AGAINST THE BUSINESS YOU BOUGHT A ZIPATO PRODUCT FROM.
IN NO EVENT WILL ZIPATO BE LIABLE FOR LOSS OF DATA OR FOR
INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING
LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN
CONTRACT, TORT, OR OTHERWISE. HOWEVER, NOTHING IN THIS
AGREEMENT LIMITS ZIPATO'S LIABILITY TO YOU (I) IN THE EVENT
OF DEATH OR PERSONAL INJURY TO THE EXTENT RESULTING
FROM ZIPATO'S NEGLIGENCE, OR (II) TO THE EXTENT RESULTING
FROM ANY FRAUDULENT MISREPRESENTATION ON THE PART
OF ZIPATO, OR (III) TO THE EXTENT ARISING UNDER PART 1
OF THE CONSUMER PROTECTION ACT 1987 OF THE UNITED
KINGDOM. SOME STATES OR COUNTRIES DO NOT ALLOW: (1) A
DISCLAIMER OF IMPLIED WARRANTIES; (2) A LIMITATION ON HOW
LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION; OR
(3) LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES
FOR CONSUMER PRODUCTS. IN SUCH STATES OR COUNTRIES,
SOME EXCLUSIONS OR LIMITATIONS OF THIS LIMITED WARRANTY
MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS
THAT MAY VARY FROM STATE TO STATE OR FROM COUNTRY TO
COUNTRY. YOU ARE ADVISED TO CONSULT APPLICABLE STATE OR
COUNTRY LAWS FOR A FULL DETERMINATION OF YOUR RIGHTS.
This Limited Product Warranty applies to ZIPATO branded hardware
products (collectively referred to as "ZIPATO Hardware Products") sold
by ZIPATO (Europe), its European subsidiaries, affiliates, authorized
resellers, or country distributors (collectively referred to as "ZIPATO
Resellers") with this Limited Product Warranty. The term "ZIPATO
Hardware Product" is limited to the hardware components and all its
internal components including firmware. The term "ZIPATO Hardware
Product" DOES NOT include any software applications or programs.
GEOGRAPHICAL SCOPE OF THE LIMITED
PRODUCT WARRANTY
This Limited Product Warranty is applicable to Hardware Products
sold by Zipato Resellers in all countries listed at the beginning of
this document under the heading "Countries in which this ZIPATO
Limited Product Warranty applies". The Limited Product Warranty
will be honored in any country where ZIPATO or its authorized service
providers offer warranty service subject to the terms and conditions
set forth in this Limited Product Warranty. However, warranty
service availability and response times may vary from country to
country and may also be subject to registration requirements.
LIMITATION OF PRODUCT WARRANTY
ZIPATO warrants that the products described below under
normal use are free from material defects in materials and
workmanship during the Limited Product Warranty Period set
forth below ("Limited Product Warranty Period"), if the product is
used and serviced in accordance with the user manual and other
documentation provided to the purchaser at the time of purchase
(or as amended from time to time). ZIPATO does not warrant that
the products will operate uninterrupted or error-free or that all
deficiencies, errors, defects or non-conformities will be corrected.
This warranty shall not apply to problems resulting from: (a)
unauthorized alterations or attachments; (b) negligence, abuse
or misuse, including failure to operate the product in accordance
with specifications or interface requirements; (c) improper
handling; (d) failure of goods or services not obtained from ZIPATO
www.zipato.com 01