Table of Contents
Advertisement
Contact Tech Support at 1.800.215.7015 or email at support@unidencellular.com
!
•
Turn AC power OFF at the mains before working on any
electrical connections.
•
All AC power wiring and coaxial cable wiring must
to local or national codes.
•
The AC line voltage must be within 10% of the voltage
specified for the booster.
•
A solid copper conductor no less than No. 8 AWG should be
connected to ground.
•
DO NOT connect a ground wire to a gas supply line.
•
DO NOT open the booster.There are no serviceable
parts inside.
Touching internal parts could cause damage from static electrical
discharge.
Opening the base unit DOES VOID THE WARRANTY.
SAFETY AND WARNINGS
4
conform
Advertisement
Table of Contents
