Download
Share
Print this page
Seconique CHARLES 1 DRAWER DRESSING TABLE & MIRROR FRAME Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Seconique Manuals
  4. Indoor Furnishing
  5. CHARLES 1 DRAWER DRESSING TABLE & MIRROR...
  6. Assembly instructions manual

Seconique CHARLES 1 DRAWER DRESSING TABLE & MIRROR FRAME Assembly Instructions Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
SEC/SH/11/16/EU1
CHARLES 1 DRAWER DRESSING TABLE & MIRROR FRAME
ASSEMBLY INSTRUCTIONS
FOR DOMESTIC USE ONLY
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY
YEARS OF SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS
SAFE ASSEMBLY AND PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH
THE FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE
THIS PRODUCT.ITS USE WILL INVALIDATE ANY CLAIM YOU MAY
HAVE AND COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES
IT MAY BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME
TO TIME.THIS IS COMPLETELY NORMAL FOR ANY FLAT PACK
FURNITURE.DO NOT OVERTIGHTEN FIXING.
FOR CLEANING,YOU MAY USE A DAMP CLOTH (NOT WET) DO NOT
USE POLISH,DETERGENT OR CHEMICAL CLEANERS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT.ALWAYS
USE A PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT
MARKING.
PAGE 1 OF 9

Advertisement

loading
Need help?

Need help?

Do you have a question about the CHARLES 1 DRAWER DRESSING TABLE & MIRROR FRAME and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Seconique CHARLES 1 DRAWER DRESSING TABLE & MIRROR FRAME

Summary of Contents for Seconique CHARLES 1 DRAWER DRESSING TABLE & MIRROR FRAME

  • Page 1 SEC/SH/11/16/EU1 CHARLES 1 DRAWER DRESSING TABLE & MIRROR FRAME ASSEMBLY INSTRUCTIONS FOR DOMESTIC USE ONLY IMPORTANT PLEASE READ BEFORE YOU CONTINUE FURTHER THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY AND PERIODIC MAINTENANCE AND CLEANING.
  • Page 2 SEC/SH/11/16/EU1 ( SCREWDRIVER NOT PROVIDED ) USE A FLAT HEAD SCREWDRIVER TO TIGHTEN THE CAM NUTS. A QUARTER TURN CLOCKWISE IS ALL THAT IS NEEDED. STEP 1 - PUSH CAM BOLT INTO INSERT STEP 2 - ALIGN THE CAM BOLT WITH THE HOLE AND PUSH TOGETHER UNTIL FLUSH. ( MAKE SURE THE ARROW OF THE CAM LOCK IS POINTING TOWARD THE EDGE OF THE PANEL.) STEP 3 - THE HEAD OF THE BOLT GOES INTO THE WIDE MOUTH OF THE CAM LOCK.YOU THEN TURN THE LOCK SO THE NARROW PART CLOSES OVER THE BOLT.

  • Page 3: Parts List

    SEC/SH/11/16/EU1 PARTS LIST PARTS PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED BEFORE YOU START SIDE PANEL - LEFT 1 PC ASSEMBLING.IF YOU DO FIND THAT SOMETHING IS MISSING,DO NOT CONTINUE ASSEMBLY,PLEASE CONTACT YOUR SUPPLIER IMMEDIATELY. TOP FRONT CROSSBAR 1 PC LOWER FRONT CROSSBAR 1 PC...

  • Page 4: Hardware List

    SEC/SH/11/16/EU1 HARDWARE LIST DOWEL 6 X 30MM 20 PCS CAM BOLT + CAM NUT 2 SETS BOLT M7 X 60MM 8 PC S SHELF SUPPORT 8 PCS 11 PCS SCREW 4 X 50MM 2 PCS SCREW 4 X 30MM SCREW 4 X 38MM 4 PCS 2 PCS ANTI - TIP STRAP...
  • Page 5 SEC/SH/11/16/EU1 STEP 1 YOU WILL NEED :- STEP 2.1 YOU WILL NEED :- 14 PCS 8 PCS 3 PCS 1 PC 2 SETS 18 PCS 2 PCS SCREW MUST BE INSERTED IN THE FIRST HOLE ON THE DRAWER RUNNER. UP SECOND HOLE FRONT BACK STEP 2.2...
  • Page 6 SEC/SH/11/16/EU1 STEP 3 STEP 4 YOU WILL NEED:- YOU WILL NEED:- 3 PCS 6 PCS FRONT SIDE VIEW 1 & 5 BEFORE FIXING THE TOP PANEL. PLEASE ALIGN THE TOP PANEL WITH THE FRONT FRAME. THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE CAUTION : ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
  • Page 7 SEC/SH/11/16/EU1 STEP 5.1 STEP 6 YOU WILL NEED:- YOU WILL NEED:- 8 PCS 6 PCS 8&9 2 PCS 2 PCS STEP 5.2 4 PCS 7 PCS 1 PC 8&9 2 PCS 6 PCS 2 PCS STEP 5.3 2 SETS THIRD HOLE LAST THIRD HOLE FRONT STEP 5.4...
  • Page 8 SEC/SH/11/16/EU1 STEP 7 YOU WILL NEED:- STEP 8 6 PCS THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE CAUTION : ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE. PAGE 8 OF 9...
  • Page 9 SEC/SH/11/16/EU1 WARNING HARDWARE LIST Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. ( Q ) Anti-Tip Strap - 2 pcs Wall fixings are not supplied with this product as different wall materials require different types of fixing devices.Please make sure you use fixings suitable for the walls in your home.
  • Page 10 SEC/SH/11/16/EU1 CHARLES 1 DRAWER DRESSING TABLE STOOL ASSEMBLY INSTRUCTIONS FOR DOMESTIC USE ONLY IMPORTANT PLEASE READ BEFORE YOU CONTINUE FURTHER THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY AND PERIODIC MAINTENANCE AND CLEANING. ASSEMBLE ON A SOFT CLEAN SURFACE.
  • Page 11 SEC/SH/11/16/EU1 PARTS LIST PARTS LIST PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED BEFORE YOU START TOP CROSSBARS 2 PCS ASSEMBLING.IF YOU DO FIND THAT SOMETHING IS MISSING,DO NOT CONTINUE CENTRE CROSSBAR 1 PC ASSEMBLY,PLEASE CONTACT YOUR SUPPLIER IMMEDIATELY. SIDE PANEL 2 PCS SEAT CUSHION...
  • Page 12 SEC/SH/11/16/EU1 STEP 1.1 STEP 2.1 YOU WILL NEED :- YOU WILL NEED :- 12 PCS 12 PCS 4 PCS 6 PCS 1 PC STEP 2.2 STEP 1.2 STEP 2.3 THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE. CAUTION : ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.