Table of Contents
Advertisement
5.5
Smart PoE Utility
5.5.1
About Smart PoE
AAEON Smart PoE application supports monitoring the current and voltage of each
PoE port in parallel, as well as the temperature of the PoE controller (IC TSP23861).
AAEON Smart PoE offers advanced thermal protection which cuts source power when
the temperature of the PoE controller exceeds 154°C, turning PoE mode to OFF status.
AAEON Smart PoE provides users with three monitoring modes: Auto, Semi-Auto, and
Manual.
Auto
PoE Controller will determine priority to implement Detect, Classification, Power On/Off
and Exception Handling.
Semi-Auto
PoE Controller will provide Detection and Classification. Power status is controlled by
user.
Manual
User can force booting power without the controller providing Detection and
Classification. User can manually power on/off each port as well as adjust wattage and
monitor the PoE controller temperature.
The user can define the power consumption of each PoE port in steps of 6, 11, 19, or 31
Watts under Semi-Auto and Manual mode to protect the device. If power consumption
exceeds the settings, the Smart PoE will throttle power to that port.
The VPC-5620S is designed to deliver 60 Watts of power per every four PoE ports. The
power budget is a total constraint which cannot be exceeded in the settings. For
Chapter 5 – SDK Guide
97
Advertisement
Table of Contents
