CARTS AND WAGONS CARE AND MAINTENANCE • Periodically check all fasteners to assure they are tight. • Clean the cart using water and mild soap. Rinse with water sprayed from a garden hose. • Check the tire pressure and adjust to recommended pressure if needed.
Page 3
CARTS AND WAGONS INSTALL AXLES AND WHEELS To better align the cart, do not fully tighten the nuts and bolts until the entire cart is assembled. NOTE: Hardware may ship attached to parts. Photos used in these instructions are not to scale.
Page 4
CARTS AND WAGONS INSTALL REEL FRAME AND REEL CRANK NOTE: Hardware may ship attached to parts. 1. Place reel frame inside the main frame with the hose connection towards the side of the frame with the two pre-drilled holes. 2. Align the holes of the U-shaped bracket on the reel 6x30mm bolt, frame with the pre-drilled holes in the main frame.
Page 5
CARTS AND WAGONS INSTALL CART HANDLE 1. Slide handle onto the vertical posts of the main frame. 2. Align the holes of the handle with the holes in the main frame. Secure using 6x40mm bolts, washers and lock nuts. Cart 6x40mm bolt, Handle washer, and...
Page 6
CARTS AND WAGONS INSTALL BASKET AND LEADER HOSE 1. Align the basket holes with the holes on the backside of the handle. Secure using 8x45mm bolts, washers, and lock nuts. See diagram A. 2. Insert one (1) rubber washer into the connector end of the leader hose and connect leader hose to the hose connection slot on the reel frame.
Page 7
CARTS AND WAGONS Space below is reserved for customer notes. Revision date: 06.27.11...