Connecting A Universal Serial Bus (Usb) Mouse - Sony Vaio PCG-FX203K Instruction & Operation Manual

Connecting peripheral devices

Connecting a Universal Serial Bus (USB) mouse

You can connect a USB device (e.g. mouse, floppy disk drive...) to your computer.
To connect a USB mouse, proceed as follows:
1 You can find 2 USB connectors (1) at the back of your notebook and 3 USB connectors at the back of the
port replicator.
2 Plug the USB mouse cable (2) into the USB connector.
You can use your USB mouse (3).
You do not need to shut down the computer before connecting or disconnecting a USB peripheral.
The USB mouse software driver is preinstalled on your notebook, therefore, you only need to plug the USB mouse into the USB connector and you
can start working.
You may need to install software (device drivers) supplied with your USB device before using the USB device.
n N
69