Customizing your notebook
6
Click Next.
7
Select the configuration name for the selected application, and enter a description if needed.
8
Click Finish.
You can use the internal timer to start software at a specific time. The timer can start applications even when the computer is in Hibernate mode.
Selecting display modes
This notebook uses the Intel
connected to an external display.
To select a display, proceed as follows:
1
Turn on the computer, after connecting the cable.
2
Click the Start button, select Settings and then click Control Panel.
The Control Panel appears.
3
Double-click Display.
The Display Properties dialog box appears.
4
Click the Settings tab.
5
Click the Advanced button.
The (Multiple Monitors) and Intel
6
Click the Intel
7
Click the Graphics Properties button.
8
Select the Driver Configuration tab.
9
Select the Synchronous Display Mode check box.
If you want to display on TV, clear the Synchronous Display Mode check box.
10
Click Apply.
11
Select the Devices tab.
®
video controller. You can select which display is used when the computer is
®
®
Graphics Technology tab*.
82815 Graphics Controller Properties dialog box appears.
n N
25