Recording Videos - Sony VAIO PCG-FR215E Software Manual

Using Click to DVD
Select the Create Slide Show option to have your pictures advance automatically during DVD
playback.
You can select background music for slide shows.
8 If you want to save your project to continue working on it later on, you can do so by clicking M (Menu)
and then clicking Save Project or Save Project as...
Alternatively, if you want to open a saved project to continue working, click M (Menu), click Open
Project... and select the saved project.
Once a video has been captured, you cannot change the video quality settings.
!
To use this feature your system must meet the following requirements:
- Click to DVD Automatic Mode: Intel Pentium 4, 2.4 GHz.
- Click to DVD: Intel Pentium 4, 3.0 GHz.

Recording videos

When capturing video from a digital video device, you can either:
Automatically capture all the video on the tape from the beginning of the tape (automatic capture),
or
Select and download a portion of the video (manual control).
Recording videos automatically (automatic capture)
To record videos automatically, proceed as follows:
1 Connect an i.LINK™ cable (not supplied) between the digital video device and the computer, and then
set the device to VCR/VTR mode.
2 Click Capture Video in the step guide.
The Capture Video screen appears.
3 Select Automatic Capture in the Capture Selection box.
If the Rewind Tape check box is selected, the tape is rewound to the beginning before capturing begins.
n N
91