Sony PCG-F801A User Manual page 47

Connecting peripheral devices
Port Replicator


It is extremely important to
close the port replicator
connector cover after
removing your computer from
the port replicator. If the cover
is left open, dirt may get
inside and damage the
computer.
To disconnect your computer from the port replicator
1
Turn off your computer and the connected peripherals.
2
Pull the levers on each side of the port replicator to disengage the computer from
the port replicator.
3
Lift the computer away from the port replicator.
4
Close the port replicator connector cover on the bottom of your computer.
47
n N