Table of Contents
Advertisement
Using a CRT or Projector
When you select CRT/Projector as the display mode, you can make
additional settings, described as follows:
1
After selecting CRT/Projector as the type of external display (step 6
on page 26), click Advanced Settings.
2
Click the External Display Options tab.
3
Select the following options:
External Display Device:
CRT
Projector
Monitor Settings:
Independent
Display Timing
Projector Settings:
Type
4
Click OK.
You cannot select Independent Display Timing when the display is set to True Color (24 bit).
Customizing Your Notebook Computer
Connects with the external computer display.
Connects with the projector.
Click to place a checkmark when you want to set
the resolution and refresh rate differently from
the computer's LCD. To change the resolution
and refresh rate, see the notes to step 6 on
page 26.
Select the projector's resolution from the drop-
down box.
27
Advertisement
Table of Contents
