Step 1; Step 2 - modway EEI-2547 Quick Start Manual

EEI-2547
STEP1:
Please open the Velcro on the bottom of Chair Seat (2).
Insert 1 piece of Front Leg (3) into the bottom of Chair Seat (2) as shown.
Attach by 2 pieces of Bolt (A), 2 pieces of Spring Washer (B), and 2 pieces of Flat Washer (C) as
shown.
Repeat the same steps for another Front Leg (3).
Do not fully tighten Bolts (A) for either leg.
Legs Package
+
Hardware Package
D×1
A×4 B×4 C×4
STEP2: Please put Chair Back (1) upside down on a carpeted or padded area.
Then attach Chair Seat (2) to Chair Back (1) by using 2 pieces of Bolt (A), 2 pieces of Spring
Washer (B), and 2 pieces of Flat Washer (C) for each corner as shown.
Do not fully tighten all Bolts (A).
A×4 B×4 C×4 D×1