Self-Diagnostic Function - Toshiba 40RF350U Adjustment

ADJUSTMENT [LCD Color Television] USA
Self Diagnostic Function
1. Press "Recall" button on Remote Control during display of adjustment menu in the
service mode. This will bring up the "S" in the right corner of screen. Now press "9"
button on remote.
The diagnosis will begin to check if interface among IC's is executed properly.
2. During diagnosis, the following displays are shown.
(1) Version information of TV-MICRO
(2) Version information of TV-MICRO EEPROP
(3) Version information of DVD MPU
(4) Revision of image file
(5) Total brightness hour of TV.
(6) Operation hour of TV in LOW mode
(7) Operation hour of TV in HIGH BRIGHT mode
(8) Number of times of TV ON/OFF.
(9) Temperature display of thermo-Sensor. (DMD) : LCD Model not used.
(10) Temperature display of thermo-Sensor. (LAMP) : LCD Model not used.
(11) DMD Engine System status
(12) TV-MICRO System status
(13) IIC-BUS status
file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_40rf350u_sm\40RF3...
: Display 1 byte data.
: Display 1 byte data.
: HL series not used.
: LCD Model not used.
: Display 4 bytes data.
: Display 4 bytes data.
: LCD Model not used.
: LCD Model not used.
: LCD Model not used.
: Not used
Стр. 6 из 8
15.05.2015