Fn+
(F9)
Fn+
(F12)
System hibernation
mode
Fn+E
Eject CD-ROM
Fn+F
Change the display
size
Fn+D
Video standby
Fn+S
System idle
Disconnects from the docking station when the
power is on, in case that the charged battery is
inserted in the computer.
Provides for the lowest level of power
consumption. When you execute this command,
the state of the system and state of the
peripheral devices are written to the hard disk
and the system power is turned off. To return
the system to the original state, use the power
switch to turn on the power.
Ejects the CD-ROM tray. This command is active
only when the CD-ROM tray is in the multi-
purpose bay; it is inactive when the drive is in
the docking station.
Zooms the display size in or out when the
display is set to VGA mode.
Turns off the LCD in order to save power.
Puts the system in idle mode, a power
management state. When the system enters idle
mode, the hard disk and video enter a low
power state, and the CPU clock and the
processor are not active.
21