Maintenance; Recommended Maintenance Schedule(S); Maintenance Safety; Preparing For Maintenance - Toro 20944 Operator's Manual

Lawn mower 46cm
Table of Contents

Advertisement

Maintenance

Note:
Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
Before each use or daily
Every 100 hours
Yearly
Yearly or before storage

Maintenance Safety

Disconnect the spark-plug wire from the spark plug
before performing any maintenance procedure.
Wear gloves and eye protection when servicing
the machine.
The blade is sharp; contacting the blade can result
in serious personal injury. Wear gloves when
servicing the blade. Do not repair or alter the
blade(s).
Never tamper with safety devices. Check their
proper operation regularly.
Tipping the machine may cause the fuel to leak.
Fuel is flammable and explosive, and can cause
personal injury. Run the engine dry or remove the
fuel with a hand pump; never siphon the fuel.
To ensure optimum performance of the machine,
use only genuine Toro replacement parts and
accessories. Replacement parts and accessories
made by other manufacturers could be dangerous,
and such use could void the product warranty.

Preparing for Maintenance

1.
Shut off the engine and wait for all moving parts
to stop.
2.
Disconnect the spark-plug wire from the spark
plug
(Figure
20).
Maintenance Procedure
• Check the engine-oil level.
• Clean grass clippings and dirt from under the machine.
• Replace the spark plug.
• Replace the air filter; replace it more frequently in dusty operating conditions.
• Replace the blade or have it sharpened (more frequently if the edge dulls quickly).
• Clean the air-cooling system; clean it more frequently in dusty operating conditions.
Refer to your engine manual.
• Lubricate the wheels.
• Empty the fuel tank before repairs as directed and before yearly storage.
3.
After performing the maintenance procedure(s),
connect the spark-plug wire to the spark plug.
Important:
Before tipping the machine to
change the oil or replace the blade, allow the
fuel tank to run dry through normal usage. If
you must tip the machine prior to running
out of fuel, use a hand fuel pump to remove
the fuel. Always tip the machine onto its
side, with the dipstick down.
WARNING
Tipping the machine may cause the fuel to
leak. Fuel is flammable and explosive and can
cause personal injury.
Run the engine dry or remove the fuel with a
hand pump; never siphon.
15
Figure 20
g188342

Advertisement

Table of Contents
loading

Table of Contents