Led Indication - Toshiba 37X3030D Service Manual

D0 (bit0)
OP8
OPT8
D7 (bit7) ~
D3 (bit3)
D2 (bit2) Enable mode that picture mode will be set in
forced when turn ON the main power
D1 (bit1) ~ Forced picture mode
D0 (bit0)

LED Indication

The Green and Red LEDs on the TV (at the bottom center of the TV) indicate the TV's
status, as described below.
Red ON (solid) and Green OFF = The TV power cord is plugged in.
Green ON (solid) and Red ON = The On timer is operating.
LED Indication
1 Green is OFF;
Red blinks continuously at 0.5-
second intervals.
2 Green is OFF;
Red blinks continuously at 1-
second intervals.
file://C:\Documents and Settings\Admin\Рабочий стол\37X3030D-03\37X3030D-03\...
FUNCTION DESCRIPTION
- (no use)
Condition
Abnormal operation
Abnormal operation of
BUS line.
Page 19 of 20
Value above 100 is no effect.
1 0 (Normal)
-
Enable Disable
(Display the
language only)
0 [dec]: Dynamic (mode-1)
(Normal)
1 [dec]: Standard (mode-2)
2 [dec]: Mild (mode-3)
3 [dec]: Memory (mode-M)
Solution
Turn OFF the TV and unplug
the power cord.
Plug the power cord in again
and turn ON the TV.
Turn OFF the TV and unplug
the power cord.
Plug the power cord in again
and turn ON the TV.
-
18.01.2016