Advertisement
Quick Links
Advertisement
Related Manuals for SY-KLONE VORTEX MAX
Summary of Contents for SY-KLONE VORTEX MAX
- Page 1 FILTER CHANGE INSTRUCTIONS MINIMIZE DUST MAXIMIZE PROTECTION...
- Page 2 Note: Never use compressed air. 8. Install new filter, ensuring the ejection port orientation is correct. 9. Install the motor assembly, ensuring it is properly locked in position. 10. After installing the new filter, inspect the Vortex MAX system for proper operation: Ejection Port a.
- Page 3 Filter Change Instructions Filter Removal, continued Filter Orientation / Reinstallation The Vortex MAX filter has four alignment pins and one ejection 3. Release wire lock port. The ejection port can be oriented in four different from clevis pin. positions, every 90°, in the filter housing.
- Page 4 Vortex MAX: Heavy Debris Screen With Heavy-Debris Screen: VMAX0005 (12-volt) VMAX0908 Vortex MAX: Wiring Kit VMAX0006 (24-volt) Technical Support Contact your dealer for Sy-Klone filters, parts and technical support, or contact Sy-Klone. Sy-Klone International Tel: +1 (904) 448-6563 email: support@sy-klone.com October 2021 ENGLITVMAXFILTER A...
Need help?
Do you have a question about the VORTEX MAX and is the answer not in the manual?
Questions and answers