CHOOSING THE RIGHT LOCATION
• Select an outdoor location where the solar panel will receive at least 6-8 hours of full, direct sunshine each
day. Ensure tree, shrub or building shadows are not shading the solar panel throughout the day as this will
influence the charge of the battery and shorten the working time at night.
• Avoid locations with strong nighttime light sources nearby, such as street or porch lights, as it may cause the
light to turn off due to the light detecting sensor receiving too much ambient light.
• Before mounting the stakes into the ground, make sure the soil is softened. Hard soil may damage or break
the stake.
STAKE ASSEMBLY
(for in-ground installation)
1.
A
B
1. Slide stake A onto stake B as shown.
2. Make sure to push the stake pieces all the way together until the ends are aligned.
3. Insert the assembled stake into the holes on the back of the LED Disk Light (C).
Make sure soil is soft before inserting the stake into the ground. Hard soil may damage or break the stake.
SL-2050
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase,
with the date of purchase as well as photos of the merchandise defect must be provided. Photos are used to
determine the cause of defects and for future quality control.
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerservice@serenityhealth.com, or via our contact us page at
SOLAR LED PATHWAY DISK LIGHTS,
Please read this manual carefully before use and keep it for future reference.
HOW SOLAR LIGHTS WORK
During the day, the solar panel converts solar energy into electricity
and stores it in the rechargeable battery. At night, the light turns on
automatically via a light detecting sensor built into the unit. How long
the light illuminates will depend upon the location of the light, weather
conditions, and how much direct sunlight the unit is exposed to.
Ensure the power is switched to 'ON' while charging.
2.
03/2019-2
www.SerenityHealth.com/contact-us/
4 - PACK
INA-931
3.
C
Page 1 / 2
Need help?
Do you have a question about the INA-931 and is the answer not in the manual?
Questions and answers