Advertisement
Thank you for choosing Sunnydaze Decor. If you have any questions,
comments or concerns please feel free to contact us by phone at: 888-881-4668,
by email: customerservice@serenityhealth.com, or you could also email us
via our contact us page at: www.SerenityHealth.com/contact-us/.
We stand behind our brand and the quality of the items we sell. We will send
new parts, or replace products at our discretion within the one year warranty
period. Before we can help, you will need to provide proof of purchase with the
date of purchase and photos of the defective merchandise. We will use the
photos to determine the cause of defect and for future quality control.
Before beginning assembly, read all warnings and safety
precautions!
WARNINGS & CAUTIONS:
Warnings:
To reduce the risk of electric shock, connect pump only to a
Ground Fault Circuit Interrupter (GFCI) outlet.
Do not exceed the voltage shown on the pump.
Always disconnect the pump from the power source before
performing any maintenance or work on the pump, light(s) or
any fountain fittings.
Inspect the power cord for damage before installation and/or
maintenance. Replace the entire pump if damage is found.
Preparation:
Advertisement
Table of Contents
Related Manuals for Sunnydaze Decor DW Series
Summary of Contents for Sunnydaze Decor DW Series
- Page 1 Thank you for choosing Sunnydaze Decor. If you have any questions, comments or concerns please feel free to contact us by phone at: 888-881-4668, by email: customerservice@serenityhealth.com, or you could also email us via our contact us page at: www.SerenityHealth.com/contact-us/.
- Page 2 Cautions: Use a proper power source as indicated on the pump label. Keep the cord away from high temperatures and/or heat sources. Do not lift the pump by its power cord. Keep the fountain out of reach of children. Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.
- Page 3 grounded, grounding type receptacle (GFCI). Processing circuit. Diagram of water circulation for twist and lock style fountain. PUMP ASSEMBLY INSTRUCTIONS: 1. Remove the pump from the package and untie the power PUMP ASSEMBLY INSTRUCTIONS: cord. Adjust the flow rate (if applicable) to the maximum (+) 1.
- Page 4 and the Basin (as shown in Fig.②. & Fig.③.). connect it to the transformer. 5. Add water according to what picture shows. Make sure that 5. Connect the transformer to a properly grounded, grounding water level cover the pump fitly just completely. type receptacle (GFCI).
- Page 7 ASSEMBLY IN STRUCTIONS: ① ② 1 Place the Ped estal on the ground lift th e Basin up and ② fi nd Arro w Mark and B utton a s pictu re(1) t hen se t the Basin ① o n the P edesta l and make sure th e butto n is clo sed tig htly Remove the pump fro m the packag e and u ntie th e powe r code A djust the flow rate(if applica ble) to the ma ximum(+) position...
Need help?
Do you have a question about the DW Series and is the answer not in the manual?
Questions and answers